• Welcome to H4O! For a reduced ad experience, please login or register with the forum.
Jeepwalker
Reaction score
93

Latest activity Postings About

    • Jeepwalker
      Jeepwalker replied to the thread Monsoon amp issues?.
      Bummer on the AC issues. Ok, I guess you know how the interior comes apart. The only other things I can think of, is might not hurt to...
    • Jeepwalker
      Jeepwalker replied to the thread Monsoon amp issues?.
      As I recall, (going from memory here) there are some grounds on the main wire harness back there. Look in the taillight area and under...
    • Jeepwalker
      H3Hummer: Drop a pic of your new 'meats' once you get them installed!! 👍 Edit: Last bit of info on the Hankook Dynapro AT2 tires for...
    • Jeepwalker
      Jeepwalker replied to the thread P0641.
      The stock battery connections were problematic for a lot of guys. And poor battery connections on any 'modern' vehicle are a source of...
    • Jeepwalker
      Jeepwalker replied to the thread P0641.
      Does it just set a 'soft' code? (not go into closed loop?). It could be as simple as corroded battery terminals, but more than likely...
    • Jeepwalker
      Jeepwalker reacted to Doc Olds's post in the thread Remote Start YES or NO with Like Like.
      The prior owner of my 09 Alpha Off Road had a Code Alarm remote start installed. Have no idea when or by who (in AR where they lived)...
    • Jeepwalker
      Curious what size tires have you been running, and what ball joints have you been wearing out? I'm surprised the ball joints in my 87...
    • Jeepwalker
      Jeepwalker replied to the thread Remote Start YES or NO.
      I personally would rather know asap if something goes awry and the engine and hear some "Shut-me-off!" noises.
    • Jeepwalker
      For me the chois is done, I will go with the BFG's MT KM3 315/75R16. Gonna order them 5, at the End of the month.
    • Jeepwalker
      Jeepwalker reacted to alrock's post in the thread Please Help. 2008 Hummer H3 Alpha with Like Like.
      You can disconnect the encoder motor and shift it manually. I know they make a tool for that, but I believe it can be done by pliers or...
    • Jeepwalker
      Jeepwalker reacted to H3Hummer's post in the thread rear bearings and seals with Like Like.
      Got that Slide Hammer an Puller , just wating to have time and a little bit of sunshine ;)
    • Jeepwalker
      Hmmmm ...that's frustrating! Vehicle start ok? Almost sounds like a bad ground/s or battery ..bad body/frame grounds. Some of the...
    • Jeepwalker
      Ok, Got the Dynapro AT2's installed. Pics below. 10 ply 285/75R16, stock size for my truck. Quick Review: Only put on 25 miles, but so...
      • H3_ New Tires.jpg
      • New Tires Tread_small.jpg
    • Jeepwalker
      They look nice. I considered those too. What pressure are you running. How are they for sound?
    • Jeepwalker
      Jeepwalker replied to the thread rear bearings and seals.
      I replaced one of my H3's outer wheel bearings a couple years ago. Not that it was worn but I had the axle out and ordered the bearing...
  • Loading…
  • Loading…
Top