• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Search results

  1. GMOG78

    Need some guidance on C0136

    C0136 Code - Base Brake System Pressure Circuit/Sensor The Electronic Brake Control Module (EBCM) uses an input from 2 brake fluid pressure sensors to enhance ABS braking and vehicle stability if equipped. What are Code C0136 Possible Symptoms? Anti-Lock Brake System (ABS) Warning Light ON...
  2. GMOG78

    2008 AlphaDon

    Hello AlphaDon, Good looking H3 Alpha. Very clean. Welcome.
  3. GMOG78

    Hello From Michigan

    Hello AlphaDon., I cruised through Lowell on my way to Grand Rapids years ago. Cool small city with a great business district. That's a good looking Hummer you have. Welcome to the forum.
  4. GMOG78

    Driver side window will not go up or down unless battery disconnected and reconnected

    Hello ebatters, Did you replace the drivers side switch with an OEM switch (GM or ACDelco)? Aftermarket switches sometimes have issues. Do what alrock suggested and check the wiring. These videos should help. Usually it's the switch or the regulator. Good luck.
  5. GMOG78

    "Rise And Fall of the Hummer"

    General Motors had lost market share over the years and had too much capacity. The company needed to reorganize. Than came the Great Recession of 2007-2009. Remember the housing bubble bursting and the sub-prime mortgage crisis? The financial system went to hell and the world suffered...
  6. GMOG78

    What did you do with your H3 recently? NEW

    Hello Aspen. I looked at the high performance parts but went with GM/ACDelco parts instead. After I burnished the brakes I had a small white car pull out in front of me. I stood on the brakes and thank goodness no paint was swapped. I'm sure the small car had to have the seats cleaned but I'm...
  7. GMOG78

    What did you do with your H3 recently? NEW

    Trash can brake job. Since I bought the Hummer I knew the brakes needed some attention. Removed the wheels, unbolted the calipers and removed the pads. Front caliper bracket bolts were rust welded in place and I ended up breaking two caliper bolts off. Removing the rotors was just as bad...
  8. GMOG78

    H3 retrieving codes

    It never used to be so complicated. Anyone remember this...
  9. GMOG78

    hi im new my name is tony gorrell im 59 years old i have a 2007 hummer h3 i need to know how to replace the heater core.

    Welcome Tony! Never replaced a heater core in a H3 but have in other vehicles. Not a fun job. Here's a video with a 2009 H3T Alpha from Paul Kelley. It will give you a good idea of what you are in for. There's also some good information at 17:30 showing the sunroof drain hoses. Good luck.
  10. GMOG78

    Hello From Michigan

    Thank you H3Humer and alrock. Black and chrome is one of my favorite color combinations. I was lucky enough to find this one.
  11. GMOG78

    H3 Traction Failed Service Traction Control System...ABS Fault

    Had OEM terminals that wouldn't tighten down. Threw them away and installed Stinger battery terminals [SPT53102 for the positive and SPT53302 for the negative] on my 2006 H3. Well worth the money.
  12. GMOG78

    NITTO tires

    I'm riding on Nitto Terra Grappler G2s [305/55r20], Very nice tire for running the trails and for pounding the pavement. They ride and handle great. Not bad for noise. Little on the expensive side. Overall a very good tire.
  13. GMOG78

    Hello From Michigan

    Thank you rascole, Korby7 and 3Hummers for the warm welcome. No doubt this is the best Hummer forum on the interweb. Here to learn and help if I can. I retired from General Motors Lansing MI site in 09. We built a lot of cars over the years [mainly Oldsmobiles]. Worked a variety of jobs...
  14. GMOG78

    Hello From Michigan

    Hello from Michigan...
  15. GMOG78

    H3 value increasing or decreasing in 5-10 years?

    Flip a coin. There could be an endless supply of replacement parts thanks to 3D printers and other future tech...