Search results

I have a video of the front axle cv joint smokin like a freight train,I have been told that is what probably made d n 3 go out. video is one minute long but I’m having problems putting it on the form.

How do. Send a video of one minute to you guys to watch,tripped me out !the front driveshaft at the cv joint was unreal hot,smokin like a rock co

No sir I purchased a front differential, Had a mechanic at a shop put it in. They called n said it had a bad transmission and said it wouldn't shift outta first gear, I went and put the shift motor in transfer case the correct way and it was fine. Worked great for two weeks and last nite it...

Oh man you just told me my future with this, Ok I got past the front diff A cv axle The h3 had been doing good,wanted to go off-road but hadn't had the chance,it is a dedicated dailt driver,when I'm not in it ,wife is taking it , Coming home today I hear this crazy noise and it was losing...

I am busy asf,I got on here to learn and did,so chasing tail Maybe, chasing my tail is a negative. Stuck to subject Mr messy ,I'm not in here for social status. Ok I replaced front diff ,well I traded electrical work for the repair,on way home sun I guess one of the original cv axles lost the...

Damn damn damn the hell

Hey guys,I bought used diff and let a customer of mine install it,they got it in and called me and said transmission is out! What's the chances that his mechanic is just not knowledgeable about Hummers awd,I didn't have no issues with tranny,not once and he'd saying it goes a min and pops outta...

Ok,I finally got the cv axles out,(that’s a lot of shit to disassemble just to remove diff. Where did the tension clip go?I see groove but snap ring is in my boot?one on spline diff side, Lol. Next is remove diff Damn bolts are sheared off to where I can’t get an 11 on but one,looks like it...

Bought a used one that has no leaks n seems to be fairly good,everything spins together,how hard is this to replace?

Yes sir won't stay locked.

That's exactly what's happening, I'll manually put it in lock n for whatever reason it goes to neutral again. I got used front diff,no leaks everything rotates,how hard is this to replace

What all I need to replace when installing used front diff? Both cv axles have to come out? Is this a simple swap? New to working on 4wd

Ok so I'll buy a front diff used and put it in,wonder why I can't make the rear wheels stay active? Removed encoder motor and rotated shaft,was able to get it in 4high locked and 4 wheel low,but it just hops into neutral or 4 high locked for whatever reason,no noise or anything just goes to...

So I removed front diff cover, big chunks,what is the gear that turns the the two driveaxles,immediately following shaft from tc? It won't hold fluid either. So do you repair n replace gear n new seals?or get used front diff?

Where do you live n how much is shipping

When it broke ,the next morning I drained all of 3 tablespoons of front diff fluid(had none in it) now the smoke from last nite makes sense, it was diff fluid. Added one bag of fluid and went around block,fluid was gone,bad leak,I hadn't even looked past the big puddle. I'm gonna pull diff plate...

Appreciate info ,here's what's confusing me is I have encoder motor off,shift shaft I turned counter clockwise fully,and rear shaft n front shaft spinning,pulled back and went forward.havevto get fluid in front diff n check tc fluid before I go around block, Thanks for heads up on the park(pawl)...

All I'm convinced about is that something is broke, How did I remove the encoder motor ,turn the shaft counter clockwise and no I have drive,scared to drive around block till I add diff fluid to front and check tc fluid.it doesn't roll in park now and assume it's in reg 4 hi, I'm here to learn...

I'll be damn,I studied the rotation of encoder motor when switching 4wheel modes and put it in regular 4,and the fucker has drive,so then tried to install motor back on and when I started it no drive again,took it off again,rotated it counter clockwise and I have drive again. I still believe I...

Took the encoder motor off, couldn't feel any change when I was turning the shaft,till I tried to rotate rear driveshaft then it changed and when I try n turn it it is rotating the front as well, Soon as my keys get back I'ma see if it drives. Still have issue with front diff but if this knocks...