cdarveaux
Well-Known Member
- Messages
- 544
- Location
- Colorado Springs, CO
They did a concept of it, but is it possible to put the LS7 7.0L V8 into either the Alpha or base model? I don't plan on doing this but I was wondering would it actually work?
-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
About the H3R...
- Thread starter cdarveaux
- Start date
Chook
Well-Known Member
- Messages
- 706
- Location
- Brisbane (Australia)
There has been a couple of 6.2L conversions that I know of............ Here is a link to one of the builds http://www.woofpacracing.com/Projec...H3Hummer/tabid/63/language/en-AU/Default.aspx
Expendable
Well-Known Member
- Messages
- 1,025
- Location
- Burbank, CA
The LS2, LS3, and LS7 blocks are the same dimensions externally. Difference is going to be parts installed to the blocks such as heads, intake, oil pans, FEAD, etc.
LS7 is almost an inch taller than an LS2 IIRC due to intake manifold and heads.
LS7 is almost an inch taller than an LS2 IIRC due to intake manifold and heads.