• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Fender removal

Panzer07

Well-Known Member
Messages
2,545
Location
Ontario, CA
For the front ones you need to remove the front grill...after that remove all off the push pin that are alone the outer edge from the actual fender...then just get to flat head screw drivers and starting from the front of the truck/fender start pulling gently at the fender towards you and with the screw driver push/press on the right and left side of the clips that hold the fender to the body frame. be careful not to yank at the fender too hard or u might brake the clips. There's nothing to it just take your time and you'll quickly get the hang of it


Torres
 

amrg

Well-Known Member
Messages
2,313
Location
Qatar
In addition, make sure you have some spare clips, those tend to become more brittle as the truck ages and its very likely you may break one (same applies for the grille)
 

derian06

Red Rockett
Messages
1,866
Location
Madison, AL
I was thinking about taking off my fenders to bedline them, but theres no way i'll beable to do it without loosing or breaking something.
 
Top