Full LED Exterior bulbs question

[LoJac963]

Has anyone swapped all their front turn signals, and all 6 rear red bulbs-bumper lights, and both upper tail lights for LED?

If so were there any issues with blinking fast, losing cruise control, RF interference, etc?

I had thought about going aftermarket LED tails but I really don't like how they look. I've had high end LED bulbs in my front blinkers for a while but the issues typically arise when you swap all bulbs for LED since there's little resistance in the system.

Thanks in advance.

 

[06 H3]

I am not too familiar with LED taillights and such but when I did my brothers jeep taillights you can order a "resistor kit" to take care of the fast blinking. I would try that, they seem to work.

 

[Scarsman]

I think you can also get led specific blinkers that plug in and replace the regular ones.

Sent from my C811 4G using Tapatalk

 

[Mb30sdl]

I have All or most of running lights LED, better ones will have resistor build in to compensate for fast blinking. Light bulbs by itself don't.

 

[RamRod]

I have All or most of running lights LED, better ones will have resistor build in to compensate for fast blinking. Light bulbs by itself don't.

Is there a brand you typically go with?

I have my interiors all switched out without any problems, was hoping to do the rest later

 

[LoJac963]

Thanks everyone, I'm aware of the built in resistors and the add on resistors. Some places even have a LED blinker relay to fix the fast blinking without the use of the add on resistors as they get extremely hot and could be a fire hazard.

 

[Mb30sdl]

There is not a lot of brands to choose from. I get "smoked" to mach H2. Found same fot H3 (corner lights), but can't find fender corner in "smoked" all clear only.

 

[Mb30sdl]

Thanks everyone, I'm aware of the built in resistors and the add on resistors. Some places even have a LED blinker relay to fix the fast blinking without the use of the add on resistors as they get extremely hot and could be a fire hazard.

Never had any problems with mine.

 

[n0useforaname]

Yeah, I've just been doing a lot of internet looking for LED replacement stuff, and it seems for the H2, most all kits are bulb. My last truck had all LED's from head to toe, but I gave it an just got light covers this time around and saved some money and wiring headaches.