Gobi Ladder and 315s (Measurments Needed PLEASE)

[MUTAINT]

Can someone measure the clearence between the Gobi ladder to a 315 to see if I can run my Spare Rack with a Gobi ladder???
I really like the size (holds a medium cooler or 3 - 5 gallon gas cans) and want to use the rack I already have and a ladder. But, if it won't fit then I might as well go with the larger Hunner rack. I have looked at so many pix of Gobi ladders on H3s that it "looks" like it will be tight but it will fit.

But i don't know without measurements at the bottom of the window line from the 315 to the ladder.

Thank you in advance!! :cheers:



(Yes, I have had 4 different spare tire combinations on Mr. Blue)

 

[Paladine71]

MU, right at the base of the window, I have a hair over an inch between the ladder and my 315. That narrows to only 1/4" further down level with the tire mount.

 

[06 H3]

I think u won't have issues because it is pushing the tire away from the ladder if u add that rack. My tire is hitting the spare just a tad. I told tim and he said it depends on the tire but there may be a spacer you could use for the spare.

Sent from my DROIDX using Tapatalk

 

[3Hummers]

My 3 is in Texas but I had to use a spacer to get the ladder on with the Kevlar MTRs.

 

[M22KLARS]

If I remember correctly I had to squeeze my ladder behind my KM2 and it barely fit without any type of spacer.

 

[MUTAINT]

Well the Spare tire mount already has a 1/4" spacer and 1/4" for the rack mount so I'm 1/2" further out than a "stock" H3. Hmmmm......I guess next time I see James (Paladine71) I'll have to see if it will fit.