Fuse block upper cover

[ABNTROOP]

My fuse box is broken all to **** and I think may be the source of my wiper problems. Got a lot of corrosion. I've sourced out a new fuse block, and lower enclosure but can not seem to find a new upper enclosure lid anywhere. Any help sourcing one would be much appreciated. Thanks!

 

[4speedfunk]

The fuse block cover is by far....the very first thing every H3 owner breaks. Horrible design.

 

[ABNTROOP]

Yeah, I never had the pleasure of doing mine, previous owner did it for me. And broke a portion off the front of the lid as well, so I'm having moisture and corrosion. issues on the fuse block. Not great with the start of the rainy season in the PNW

 

[f5moab]

If a locking tab is broken, I have used a small tie strap. But you can order a new one from GMPARTSDIRECT.COM and it is not that expensive

 

[ABNTROOP]

Checked agama parts direct and was unable to find a part# for the *upper* fuse box lid as it seems the upper lid, fuse block, and lower box are three seperate parts you have to order. Zip tieing the lid doesn't solve my problem as a hole is broken in the font face. So anyway, if anyone could actually come up with a link to the upper lid so I could order one as I have not had any luck tracking one down yet I'd be much obliged.

 

[H3slate]

I have the part number at home on my pc. Will post it up tonight.

Sent from my mobile bat cave using Tapatalk 2

 

[ABNTROOP]

Thanks Erik, much appreciated :thumbs:

 

[H3slate]

15906628 H3 Fuse Box Cover

$14.43 at gmpartsdirect.

 

[Bigunit]

...and mark Fuse 27 with a Sharpie for easy reference.

Sent from my DROID RAZR using Tapataint

 

[ABNTROOP]

Airbags? :huh:

 

[WillieMo]

The fuse block cover is by far....the very first thing every H3 owner breaks. Horrible design.

Hahahaha I broke it the same day I got my first H3 home... heated seats were not working and I went to check the fuse... bam broke a tab but felt confident I could open it with no problems after working out how it opened up... nope broke the other tab the next time I went to take it off... needless to say i've bought two new ones one on the rig and a spare just in case... even after all this time I still hate opening it up a situation made worse by dual batteries and a solenoid mounted right above the fuse block!!!!

 

[4speedfunk]

Yup...same thing here. Fortunately gravity holds mine in place (most of the time).

 

[ABNTROOP]

Faaaaaaaack....
Hello,


Thank you for choosing GMPartsDirect.com. Unfortunately part #15906628 is currently out of stock and on back order.
If you would like to cancel this part, please let us know. As long as GM hasn't released the back order on the part, we'll be able to cancel it. Once GM releases the part off back order, you'll no longer be able to cancel.
As stated, at this time the part is on back order and we are unsure as to when it will be made available again.
We look forward to hearing from you soon.


Regards,


Eric
GMPartsDirect.com

 

[alrock]

I have a suspicion it's more than backordered, but mostly discontinued. I looked around for quite a while trying to help and couldn't find this anywhere.

 

[H3slate]

Try GM Parts House.

http://store.gmpartshouse.com/parts...make=Hummer&action=oePartSearch&siteid=214638

 

[06 H3]

Have scarsman cut one out...it may be difficult but if he can then get the fuse #s and laminate and glue it to the inside. May be ghetto but if they discontinued the cover it may be the best option

 

[ABNTROOP]

I have a suspicion it's more than backordered, but mostly discontinued. I looked around for quite a while trying to help and couldn't find this anywhere.

It's the beginning of the end for parts availability. Stop breaking half shafts you twats! There won't be any for the rest of us. In the meantime, one of you hoarders on this forum care to help a guy out and give up one of your 3-5 spare lids? LMAO!:giggle:

 

[Chook]

http://www.carcarekiosk.com/video/2008_Hummer_H3_3.7L_5_Cyl./fuse_engine/check Maybe if you wear gloves you wont break as many covers !!!! (I must admit as I was watching it I was looking to see if he broke the cover)

 

[Zach]

Faaaaaaaack....
Hello,


Thank you for choosing GMPartsDirect.com. Unfortunately part #15906628 is currently out of stock and on back order.
If you would like to cancel this part, please let us know. As long as GM hasn't released the back order on the part, we'll be able to cancel it. Once GM releases the part off back order, you'll no longer be able to cancel.
As stated, at this time the part is on back order and we are unsure as to when it will be made available again.
We look forward to hearing from you soon.


Regards,


Eric
GMPartsDirect.com

Funny, I show stock available at GM. My local PDC has 6

 

[ABNTROOP]

well ****... am gonna keep hunting I suppose

 

[Bigunit]

...or you could just have Zack get you one...might be easier...just throwing the idea out there.

Sent from my XT1080 using Tapatalk 2

 

[ABNTROOP]

Didn't wanna push as he didn't offer :emb: But since you've decided to slut him out.... :giggle:

 

[poncho1965]

Hey I'll take one too Zach! Oh yah, a half shaft


Mike

 

[Bigunit]

Zack, you slut! Since you are offering to get them, count me in for
1 cover.

 

[ABNTROOP]

Just got a PM. Thanks Zach!