How to install rugged ridge snorkel?

[poweraidon]

I just got a rugged ridge snorkel (just the high mount) and I know a lot of you guys have the same snorkel on your 3. So how do I install it?

Sent from my iPhone using Tapatalk

 

[ABNTROOP]

This should help you gather the parts, cut/modify and plumb it. Happy installing!
http://www.hummer4x4offroad.com/for...-snorkel-extension-upgrade)&highlight=Snorkel

 

[Chocflip201]

This should help you gather the parts, cut/modify and plumb it. Happy installing!
http://www.hummer4x4offroad.com/for...-snorkel-extension-upgrade)&highlight=Snorkel

I had read this a couple weeks ago, I was thinking for mine I would copy this same plumbing as he did, but just use the factory "faux" snorkel and make it functional.

I think the Rugged Ridge snorkel looks okay on our 3's, but you can definitely tell that it's not directly made for us.

 

[poweraidon]

Do you guys know how to remove the front left pillar by the windshield?


Sent from my iPhone using Tapatalk

 

[Chocflip201]

Do you guys know how to remove the front left pillar by the windshield?


Sent from my iPhone using Tapatalk

http://schwarttzy.com/wp-content/uploads/2013/01/Hummer-H3-Exterior-Trim.pdf

page 22.

Are you putting your snorkel on the left side?

 

[ABNTROOP]

Driver side or passenger?

 

[digglesworth]

So with this particular snorkel, air is flowing in through the vent cover AND the snorkel inlet. It doesn't look like the system is sealed all the way up to the snorkel inlet.

 

[RamRod]

When I had mine set up I ran my plumbing up into the snorkel so that there was only air coming in from the snorkel

 

[Chocflip201]

So with this particular snorkel, air is flowing in through the vent cover AND the snorkel inlet. It doesn't look like the system is sealed all the way up to the snorkel inlet.

Just depends on how you route your intake tubing, should be able to seal it up and only have air come in through the snorkel inlet.

 

[digglesworth]

On the install thread, it looked lime he just sealed it up to the hole in the body in the bottom of that air vent. Probably have to make a tube that comes out of the bottom of that snorkel, goes down through that hole, and connects in the fenderwell...