My M416 with H3 - Camper Set Up
Finally! Got my stuff out of storage, and set up my homemade camper that's based on my M416 trailer. Set it up with the help of my sons today!
Set-up consists of four tables that fit inside the trailer, along with legs, a receiver tray as a porch, and jack stands to lock the trailer suspension.
The tables, set-up, make an 8' x 12' platform over the 4'x6' trailer. I can then easily pitch an 8' x 10' tent (a fairly standard size) over the platform. Keeps me comfortably up off the ground.
Main downside is the pipe-thread legs and awkwardness of the tables once the legs are in place. Once I'm "in practice" from using it reasonably often, it still takes me the better part of an hour to get it all up and ready.
Here are some pics:
View from the rear of trailer, where I go in and out:
View from the side - showing hitch where it would connect to H3:
View from rear showing legs and jack stands in more detail - need a lot of fiddly bits stored in trailer to set it level when camping in an unimproved area. Here I was just setting it up in my driveway.
View from above - tabled are 1/4" plywood screwed to a frame of 1"x2"s and 2"x2"s; each table very light, but strong enough to support my weight.
View inside the tent - an 8'x10' dome tent is actually pretty roomy!
Here's what that trailer looks like behind the H3; all my camping gear and the 4 tables fit comfortably inside: