H3 Poly Bushing kits?... Oh, Dont bedline Hummers!!!

[hodges81]

Is there any good Poly Bushing kits for the H3? I've seen some on eBay but I was a little sceptical so I figured I'd ask the pro's. lol! Does Scorp do bushing kits or anybody know of a reliable company? Did a lot of hardcore off-roading and the mud really took it's toll even though I greased before and after. Just wanna make it ride like it did new... But Better...
:thumbs:

I just finished painting my H3 white again due to the Vortex Bedliner letting water and dirt in behind it somehow and I didn't want my toy to rust out. If y'all know anybody that had bedliner sprayed on their Hummer worn them. I found out from a friend that has a completely rusted out Wranlger now and he had his sprayed just around 2 years.
:shame:

[video=youtube_share;IHBaz4p3wcU]http://youtu.be/IHBaz4p3wcU[/video]


[video=youtube_share;HMrynSkoucA]http://youtu.be/HMrynSkoucA[/video]

 

[SuperBuickGuy]

If I ever bedline the outside of anything, I'll use the liner that isn't a rough texture.

 

[hodges81]

It wasnt a rough texture?... It was a sprayed on liner with some texture but it was smooth. Felt like a regular paint jog with bumps. LOL!!! But spray away I just tried to help.

 

[USMC_TOP]

Nice work! We just had a guy do his. Green and black I think. I hope it treats him right.


Sent from my iPhone using Tapatalk

 

[hodges81]

Tell him to watch around all windows and the bottom of the doors. That's where mine started to rust. Yet, when I tore it off dirt was spread everywhere. If the shop sanded correctly instead of half assing like mine did hopefully he'll be fine.

 

[hodges81]

How about those bushings? lol

 

[4speedfunk]

the mud really took it's toll even though I greased before and after.

Yeah...greasing an H3 is a quick job.

 

[Ghostbuster]

Yeah...greasing an H3 is a quick job.

:giggle:

 

[digglesworth]

I just went through and sprayed all my bushings with silicone spray. Some are really cracked. The sway bars aren't too bad but the lower control arms are the worst. Upper control arms aren't too bad. I'm wondering what there is to grease since we don't have fittings anywhere....

 

[hodges81]

I upgraded the lower ball joints and sway bar links to Moog and drilled upper control arms and installed grease fittings. After 6 months of off roading, I need to replace both lower ball joints again. I was asking about poly bushings for the sway bar links and for the control arms where they bolt to the frame and also the leaf-spring bushings. Mine are all shot.

Do they have poly motor mounts instead of rubber/silicone?

 

[alrock]

I don't know of any poly bushings for motor mounts, sway bars, leaf springs or control arms. Best bet would be to start with http://energysuspension.com/ and give them a call. They may have something that works; I just haven't ever seen anything discussed.