H3T Thorparts H3T rear bumpers

[4Lo-Tank]

*please correct if posted in the wrong place*
Hey guys.
So I taked to thorparts about doing another run on the rear bumper kits for the H3T. It would be a group buy have to place an order for atleast 10 bumpers kits to make it happen as he doesnt produce them anymore. Cost per bumper kit is $600. This kit includes the full rear bumper, new end caps for the plastics (you have to trim them to fit the full size bumper on) and all hardware. D-Ring is in the same location. Shipping is not included but I can get shipping quotes. Gonna say probably between $85-$100 to ship pending where you are. Let me know if you T owners are interested. Takes like 30 days or so to complete the order once the deposits are in. I am paying for the complete order upfront myself to get them made so everything will go through me. Crazy things you do when you want something lol. Lemme know!

Sent from my SM-G955U using Tapatalk

 

[DFW Spartan]

I'll bite. If a group buy is going to happen, count me in. I appreciate you running point on this, and CJ over at THOR parts for considering doing a limited production run of the H3T rear bumpers.

What about the rear tire swing gate? Is that option on the table, and if so, at what cost?

Approximately how much will shipping be to Dallas, TX 75219?

Thanks!

 

[H3TDave]

That was gonna be a question for me too. I'd love to get the swing spare tire mount.

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[4Lo-Tank]

Ill check with him and see about the swing gates. Right now im at 7 people so waiting to here back from a couple still.

Sent from my SM-G955U using Tapatalk

 

[4speedfunk]

I won’t be making any more gates...sorry.

 

[Traxx]

There are probably a thousand different jeep gates that could be fitted, large enough surface on top to have space for a mount.

 

[4speedfunk]

Pre-runner tailgate with a spare mount is the way to go. Having fabbed both, it’s a much better way to carry a spare. Frankly if I had a T...I would build a custom tube framed camper top with roll-up canvas sides and incorporate the spare somewhere into it. Canbacks are lightweight, have great side access, and keep true to the Hummer military heritage...

https://goo.gl/images/S7H8kd

 

[DFW Spartan]

Pre-runner tailgate with a spare mount is the way to go. Having fabbed both, it’s a much better way to carry a spare. Frankly if I had a T...I would build a custom tube framed camper top with roll-up canvas sides and incorporate the spare somewhere into it. Canbacks are lightweight, have great side access, and keep true to the Hummer military heritage...

https://goo.gl/images/S7H8kd

If I didn't already have the Snugtop slantback on there, I'd probably do a custom can-back. I'm just not ready to lose the slantback yet, as impractical as it is.

Sent from my SM-G955U using Tapatalk

 

[RamRod]

If you head to my build thread and looks at the posts from 2013 (near the beginning) you will see the way I put a swing gate on my Thor parts bumper.... its been used with a 37" tire mounted to it & going strong for 4.5 years now and I don't have any complaints other then if I were to do it all over again I would make my swing-out physically shorter or split it and make it a dual swing-out (50/50) so that it was easier to manage in tight spots

 

[4Lo-Tank]

If I didn't already have the Snugtop slantback on there, I'd probably do a custom can-back. I'm just not ready to lose the slantback yet, as impractical as it is.

Sent from my SM-G955U using Tapatalk

I loved my slant but ran into that issue. It became non practical for me. Just sold it two weeks ago

Sent from my SM-G955U using Tapatalk

 

[SolidusJ]

So going to make one!!!