Parking Brake Handle broke off?

[H3ALPHA]

Pulled it as always, but this time it came out in my hand.

Looks like the plastic inside is broken off.

How hard is this to fix myself?

I see the part is like $6.

 

[alrock]

I'm thinking I'd spend the $6 for a new one.

 

[cbetts]

I found one on Amazon for my H3: :link:

It was cashmere, but worked just fine!

Looks like I replaced the cable at the same time. I found this picture in my album:

They were both simple to install.

 

[Bigunit]

The ebony/black parking brake handle OEM part # is 20843963. You can buy them on Amazon.

Sent from my moto z4 using Tapatalk

 

[zebra]

bought our truck with a broken handle... got a new OEM handle & cable on eBay for pretty cheap.
installed in 15-20min.

 

[H3ALPHA]

Just received everything (the handle took forever).

My question, the cable what do I need to do with that? Do I have to remove part of the dash, etc. to access it?

I am completely blind on what I need to do.

Thanks for the help all!

 

[alrock]

Maybe take a picture so we know what you're dealing with. Hopefully the cable is sitting right there where the handle goes and you push the cable connector into the handle.

 

[H3ALPHA]

Maybe take a picture so we know what you're dealing with. Hopefully the cable is sitting right there where the handle goes and you push the cable connector into the handle.

The clips on the cable are broken, the handle is fine.

So it is the cable that needs to be replaced.

Took the photo from cbetts, on his, one of his clips are broken that go into the handle. On mine, both broke off.



So I need to replace the cable.

 

[alrock]

Looks like you need this https://www.amazon.com/ACDelco-2579...-2304-9-1-145-61-1&vehicleName=2007+Hummer+H3

 

[H3ALPHA]

Looks like you need this https://www.amazon.com/ACDelco-2579...-2304-9-1-145-61-1&vehicleName=2007+Hummer+H3

I have it.

Just don't know what I need to do.

Looking under there, can't seem to figure out how to undo it from the hook.

Anyone done this?