• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Search results

  1. 06 H3

    H3 I5 power steering pump comparison.

    So, all this talk and nothing about the pump. So now let's talk about volume!! The whole reason I started asking questions. There is a lot going on here. Crank pulley diameter, PS pump pulley diameter (and a 2nd option to compare) Pump displacement per rev (cu in./rev) the most important...
  2. 06 H3

    H3 I5 power steering pump comparison.

    Ok, here we go. I may copy and paste this tech into my thread but for now it belongs here. What I am trying to accomplish is to have a system that has a lot of power and in this case the power comes at the downfall of needing a ton of volume. I can setup a system with moderate volume needs so I...
  3. 06 H3

    H3 I5 power steering pump comparison.

    No pulleys or resi needed. Thanks guys! @Korby7 you are in Utah right? I may be in Utah for work in the next 2 weeks. My thought process is get the cu in per rev, the most important part for my needs. If it’s greater than the average pump I’ll use my new one. I’ll tap the resi port for a large...
  4. 06 H3

    H3 I5 power steering pump comparison.

    I ordered one, I’ll be tearing it apart and seeing what I can find in the name of Cubic inches per revolution. That’s what I need for low end flow for what I am trying to create. If anyone has a used H3 pump/dying I’ll buy it off of you so I can tear that apart instead
  5. 06 H3

    H3 I5 power steering pump comparison.

    GREAT INFO. I have gone down the rabbit hole for fluid volume for a “special” project I am working on. This is very helpful. From the back of it it looks like the H3 pump can push more volume per revolution?
  6. 06 H3

    So who watched King of Hammers this year?

    Night time is a disaster depending on where you are at. If you avoid chocolate thunder and backdoor you are usually pretty safe. We went night wheeling on multiple trails and didn't have any run in's with idiots....but I know I would have, if I was at chocolate thunder or backdoor.
  7. 06 H3

    06 H3's Squeakin H3 Build

    Absolutely, a buggy is a tool for one very specific job to conquer rocks, without comfort, or the ability to carry things etc. 1 friend is already there and another friend is on his way. Both have a family rig (ZJ on 1 tons and 40s and a JK on 1 tons and 37s) for trips like the rubicon and then...
  8. 06 H3

    06 H3's Squeakin H3 Build

    So we get myself back out and my friend runs back to camp while we start fixing. I changed my driveshaft to my well worn, out of balance 1410 single joint on both ends driveshaft and hit the obstacle again. This time, with a new line I make it up the obstacle I broke on! What a great...
  9. 06 H3

    06 H3's Squeakin H3 Build

    Ok, I am back from the hammers, and it was a good trip. Now that I am home, it is weird, the rise and hype of the event and the craziness of getting ready and prepping and now it's kind of a big letdown. I usually don't feel this way after a trip, but I do. Anyways, wheeling was a little sparse...
  10. 06 H3

    So who watched King of Hammers this year?

    The coverage gets better and better each year. Those Maverick R's are impressive. I truly wonder what they have in them over and above stock. We took my friend's uncle to the rubicon last year and his Maverik R didn't fare well. He broke a locker, had significant damage to the Can am aftermarket...
  11. 06 H3

    Is it possible to install a 4l80 transmission in my 07 H-3 with the 3.7 engine?

    Another issue with the 4l80 is that the 1st gear ratio is higher than the 4l60E. So it will make the 3.7L feel even slower. Overdrive is lower so that might be nicer at highway speeds.
  12. 06 H3

    Pickle's Solid Axle Swap

    Yes, I was around many JKs when they JK was new. Bent axle tubes, broken R&P's, broken shafts were common. The JL axle is a big improvement from what I have seen. There is a lot that goes into R&P design. Contact patch being one of them and pinon offset. The ford 9in does well due to pinion to...
  13. 06 H3

    Pickle's Solid Axle Swap

    I wouldn't waste your time with JK Axles...or just go to a D60. The 392 didn't come in JK axles and the JK axles are weaker than the JL axles
  14. 06 H3

    06 H3's Squeakin H3 Build

    I did a nice and quick 70-80 mile loop of highway and snow wheeling on New years day. We finally got snow in the valley which is late this season so we knew snow would be had in the mtns. If I wasn't up so late and had a plan before New Years day I would have gotten up early and gone for the...
  15. 06 H3

    06 H3's Squeakin H3 Build

    got my new arm built on the pass side. Then drove it over to my parents house. Got the 42s mounted!!! So….sway bar! It works (for now, we will see if it breaks like mentioned) It definitely settles things down for on road driving. If you really hammer on it, like snow drifting, it...
  16. 06 H3

    06 H3's Squeakin H3 Build

    Alright, this is a rabbit hole I have gone down too far. Sway bars. I have almost 50k miles on the SAS. That’s wild to think about but I have plenty of data now. Most of that time is with no front sway bar/no rear sway bar or no front sway bar/ just a rear bar. Linked up front and leaf spring...
  17. 06 H3

    06 H3's Squeakin H3 Build

    I wanted to share this video that I got from earlier this year when I was rock crawling. I think this sums up why I did everything I did to my H3. Hybrid Roll cage, it protects the body just as much as it protects me from a roll over. You can see I use it like you use rock sliders. Big tires...
  18. 06 H3

    Hummer H3 HD Dana 50/ CV shaft upgrade

    Worn out bushings? Or some mounting bracket got tweaked
  19. 06 H3

    Need a General Contractor In Sarasota, Florida

    I’ll message Gpcalero on social media. Sorry for the BS you are dealing with Dave.
  20. 06 H3

    Year in Review

    Well, another year has come and gone. What the hell. 2024. Let's get to it. Mods: Honestly, I did not do many major mods, it was a heavy year for major mods in 2023 so I felt 2024 revolved around refinement of those modifications and some beautification. -Rear sway bar, I can live the...
Top