Center Dash Vents

[Dennis]

My center dash vent (the right hand one)..Broke and will not turn the vanes left or right, only the center vane moves with the left-right wheel thingy..a little plastic tit broke off the center vane and it is not engaged with the other companion vanes...

So I'm trying to find on-line somewhere to get a new one…the whole vent assy just snaps off the back of the center console...so it must be replaceable.

Any help finding a source is appreciated...thanks.

BTW..I do realize of course, the dealer would be an option, if nothing else.

 

[Bigunit]

eenuis,
Try contacting this seller on Ebay. He has several salvage H3s & I'm sure he can find that piece for you. I have bought several parts from him. He's also a nice guy if you get to talking to him.

http://stores.ebay.com/Wayne-Auto-P...49782012&_sid=170607802&_trksid=p4634.c0.m322

 

[Dennis]

eenuis,
Try contacting this seller on Ebay. He has several salvage H3s & I'm sure he can find that piece for you. I have bought several parts from him. He's also a nice guy if you get to talking to him.

http://stores.ebay.com/Wayne-Auto-P...49782012&_sid=170607802&_trksid=p4634.c0.m322

I'm gonna go out on a limb and assume you were talking to me..LOL..who the hell is eenuis?


Thanks..I'll give him a try first..

 

[Bigunit]

That was my feeble attempt at trying to quickly type "Dennis"...:emb:

Here's the phone #/contact info:

http://www.wayneautoparts.com/contactus.html

 

[j3jackson]

Funny

 

[Bigunit]

Dennis,
The GM OEM part numbers for the center outlet vents are:

R side: 25816725
L side: 25816724

Cheapest on-line price for a new one that I could find is around $45 (+ shipping costs). Hope that helps.

 

[Gunner_45]

Eenuis


Bwaaaaaaaaaaaaaaaaaaaaaa ! ! !



:wink:

 

[Dennis]

Dennis,
The GM OEM part numbers for the center outlet vents are:

R side: 25816725
L side: 25816724

Cheapest on-line price for a new one that I could find is around $45 (+ shipping costs). Hope that helps.

Yup me too...Hey, thanks for the help buddy....:thumbs:


yo, gummer

:mock:

 

[Dennis]

Eenuis


Bwaaaaaaaaaaaaaaaaaaaaaa ! ! !



:wink:

Thanks...Now see what you did!..I got an "aka" over there above my Avatar..


Seriously..LMFAO..that is pretty good...I likes it:giggle:

 

[Dennis]

The genuine GM part Vent Assy arrived about 2 weeks ago..Have been waiting for the outside temps to drop below a million degrees before I replaced the the broken one..Which I did today..1-2-3..and I was done in 3 minutes..Simple!...Not bragging, just pleased at how easy it was to change out..


that is all..

 

[Gunner_45]

Oh hell, you could have got by with some old shoebox cardboard and some duct tape.

No need to rush the repair.

Won't drop below 95 till late November.

:mock:

Glad you got it fixed.

Based on some of your past posts and how picky you are about that truck, I can only imagine how bad that **** bothered you.

 

[alrock]

You were worried about changing a vent in summer heat? I changed out two sensors in the engine block last week, it was 115 out and the engine was still burning hot.

Oh way, I think that means you're smarter than me :whaa:

 

[Dennis]

You were worried about changing a vent in summer heat? I changed out two sensors in the engine block last week, it was 115 out and the engine was still burning hot.

Oh way, I think that means you're smarter than me :whaa:

115 degrees?!?..Holy Sh1t!!....I guess I was thinking it was gonna be a pain..and procrastinated..but Gunner is right, it bothered the fuk out me:gaah:

It hit 112 and 113 in a row last week...hottest on record for here..Today hit 91 ...man, it felt cold today..:no: