• Welcome to H4O! For a reduced ad experience, please login or register with the forum.
  • The Swap Meet is not a regulated market, and buyers/sellers are not screened. Please do your homework before agreeing to anyone for any purchases or sales. If you have any questions about the user, please contact @Alrock via private message and I will attempt to provide any relevant information about the person, including location based on IP address. This is not a guarantee or promise of delivery but the addtional information may be helpful to you in your transaction. There are no guarantees here so use your judgement. Consider payment options like PayPal that have recourse (only when treated as a sale, and not as % between friends). Scammers will often use Zelle or ask for PayPal between friends because you cannot reclaim the money in the event of fraud or non-delivery. If a user has just joined and/or has few posts they should be viewed very cautiously.

Differential end brackets

A

atvspeed4

Well-Known Member
Messages
1,212
Location
massachusetts
For some reason the bushings on my 2006 were internally different than the new ones that 4 speed sent me. Either way we figured it out and have a set installed on my 2006 now and have another complete set sitting on the bench all done.
 
A

atvspeed4

Well-Known Member
Messages
1,212
Location
massachusetts
Next project is turning a delrin bushing for our differential crossmember. I wish someone had a spare rancho crossmember because we could make you a delrin bushing for that as well.
 
06 H3

06 H3

a.k.a. "The Jackal"
Messages
9,505
Location
Meridian, ID
Wish I had one...if you want I can send you the rubber bushing I have but I believe there is some flaws in the bushing itself.
 
A

atvspeed4

Well-Known Member
Messages
1,212
Location
massachusetts
Do you have any pictures of the crossmember and also the bushing alone? We still might be able to come up with something. We like a challenge
 
4speedfunk

4speedfunk

Well-Known Member
Messages
4,250
Location
Tardville
You need to be doing this mod the Colorado/Canyon brackets. Period. Its the same bracket with twice the bushing! Having (2) bushings out at each end of the axle to control the housing flex is whats needed. Adding urethane bushings at all (4) mounting points with a 5th urethane mount at the snout (Rancho style)...and I think you would have THE ULTIMATE set-up!

(then all you need is a chopped 10-bolt and 4.88s!)
 
A

atvspeed4

Well-Known Member
Messages
1,212
Location
massachusetts
4speedfunk said:
You need to be doing this mod the Colorado/Canyon brackets. Period. Its the same bracket with twice the bushing! Having (2) bushings out at each end of the axle to control the housing flex is whats needed. Adding urethane bushings at all (4) mounting points with a 5th urethane mount at the snout (Rancho style)...and I think you would have THE ULTIMATE set-up!

(then all you need is a chopped 10-bolt and 4.88s!)
Click to expand...

Honestly we do not need the colorado mounts. With delrin at all three corners I can go in 4low 1st gear and let off the clutch with the brakes on and the differential does not move. PERIOD. This is the next best thing to solid mounts!

I do want a 10 bolt though....
 
Last edited:
06 H3

06 H3

a.k.a. "The Jackal"
Messages
9,505
Location
Meridian, ID
Holy ****, I only installed one side last night due to rain but damn the tightness of the front end is 100000 times better. Can't wait to do the other side and new rancho bushing. Kick ass modification and highly recommended. Thanks atvspeed4!
 
You must log in or register to reply here.
Top