Front end squeal

[Burn]

Ok so the other day I was turning around and was just about full lock to the left and some squeal from the front, I tried it to the right and it did not do it. As long as I don't turn very sharp left and move no problem, turn sharp left and this is from a stop or slow roll and squeeek. Any ideas?

2006 H3, torsion bars turned up and 315's.

 

[cdarveaux]

Ok so the other day I was turning around and was just about full lock to the left and some squeal from the front, I tried it to the right and it did not do it. As long as I don't turn very sharp left and move no problem, turn sharp left and this is from a stop or slow roll and squeeek. Any ideas?

2006 H3, torsion bars turned up and 315's.

I had that issue, it was the body bushings and the squeaking stopped

 

[alrock]

Does the squeal occur when stationary or just when rolling?

 

[Burn]

Only when rolling and next to full lock and only happens on left turns.

 

[alrock]

Ball joints maybe? They could squeak under pressure. Perhaps your steering isn't centered - more adjustment in one tie rod vs. the other - and when you turn full lock left the power steering pump is being tested; going to the right it may not reach that extreme. These are pretty speculative guesses.