Got a couple of presents for the 3 yesterday.....

[3Hummers]

Too bad on the health issues, hope they are resolved soon. You trying to catch up with Mark on how big of a pile of Hummer parts you you build?

 

[M22KLARS]

That's impossible. It's like trying to keep up with your post whoring.

 

[08SolarFlareH3]

Too bad on the health issues, hope they are resolved soon. You trying to catch up with Mark on how big of a pile of Hummer parts you you build?

So far its been going on almost a year and while there have been some "up" times, I keep feeling worse and worse. On the bright side, the build keeps me motivated. I have been collecting parts, so they are here and ready to go on once I feel a little better. The 3 is currently pretty much stock with the exception of the 33x12.50 MT's and Indash DVD & Navigation that I installed when I was feeling better.

I got a whole pile of stuff sitting here just waiting to go on...............................
GM Paint To Match Grille (Still needs to have it painted but starting to consider a textured black finish like bedliner)
GM Accessories Brush Guard (I might not use this, it really depends on what I use for a winch mount)
GM Accessories Rocker Panel Protectors
GM Accessories Under Body Shield
GM Accessories Roof Mount Off Road Lights
GM Accessories Fuel Door Cover (Still needs to be powder coated)
(5) OEM H3T Steel Wheels (Tires are still up in the air but thinking about sticking with a 33x12.5 or 305/70R16 but I may end up with 35's)
OEM Fender Flares
OEM "Export" Mud Flaps
OEM "Export" Marker Lights
OEM "Export" Turn Signals
(2) Hummer H2 / Bosch Off Road Lights (have OEM off road light switch)
Bilstein 5100 Shocks (front & rear)
Trail Duty Extended Bump Stops
Sylvania Silverstar Bulbs (Headlights, fog lights, back up and both off road lights)
ARB Rear Air Locker
ARB Onboard Compressor
and the list goes on and on.......

On the to do list of things to pick up still.......
Winch Mount - I would really like to come across a Boulder Accessories bumper but I am not sure that will happen. I have also considered the ARB bumper or just going with something like DOI or CBPhoto mount.
Winch - Warn VR10000 or VR12000, thinking about going with the 12k due to all the mud I see around here. I like the fact they are made (or at least assembled) in the USA but are priced similar to Chinese made winches. Also plan on switching the line out for 3/8" Viking synthetic winch line and hawse style fairlead.
Rear Bumper - Thorparts rear bumper with the optional 2nd tow hook. Will either go with a Rockhard or an OEM H2 spare tire licence plate mount.
ARB Safari Snorkel - Already picked up a spare painted fender for when I decide to.

Other stuff I am considering but not 100% sure on..............
ARB Roof Rack
Powder Coating The Current Wheels

 

[Hans3T]

I also have a pair of H2 Bosch off road lights that I plan to implement into the BA at some point. Please let me know how you end up wiring these guys!!

 

[08SolarFlareH3]

I also have a pair of H2 Bosch off road lights that I plan to implement into the BA at some point. Please let me know how you end up wiring these guys!!

I have an OEM off road light switch and I got pigtails from ACDelco for the lights and the switch. The only thing left for me to pick up is a relay and pigtail. If you have any questions regarding wiring them, let me know and I will help you out. I can provide you with wiring diagrams, part numbers for pigtails, and etc.

 

[Hans3T]

Thank you!!

I will remember this for another time -- likely this summer. Thank you very much!!! I am going to drill them into my BA -- I think they'll look/perform their best there.

 

[08SolarFlareH3]

Thank you!!

I will remember this for another time -- likely this summer. Thank you very much!!! I am going to drill them into my BA -- I think they'll look/perform their best there.

MUTAINT has them on his BA bumper and they look great!

*edit for pics

 

[HUMMER INVESTMENTS]

:thumbs::corn:

 

[Bigunit]

That's impossible. It's like trying to keep up with your post whoring.

:giggle: Man Dan, if that isn't the pot calling the kettle black, I don't know what is!

 

[Bigunit]

I got a whole pile of stuff sitting here just waiting to go on...............................
GM Paint To Match Grille (Still needs to have it painted but starting to consider a textured black finish like bedliner)
GM Accessories Brush Guard (I might not use this, it really depends on what I use for a winch mount)
GM Accessories Rocker Panel Protectors
GM Accessories Under Body Shield
GM Accessories Roof Mount Off Road Lights
GM Accessories Fuel Door Cover (Still needs to be powder coated)
(5) OEM H3T Steel Wheels (Tires are still up in the air but thinking about sticking with a 33x12.5 or 305/70R16 but I may end up with 35's)
OEM Fender Flares
OEM "Export" Mud Flaps
OEM "Export" Marker Lights
OEM "Export" Turn Signals
(2) Hummer H2 / Bosch Off Road Lights (have OEM off road light switch)
Bilstein 5100 Shocks (front & rear)
Trail Duty Extended Bump Stops
Sylvania Silverstar Bulbs (Headlights, fog lights, back up and both off road lights)
ARB Rear Air Locker
ARB Onboard Compressor
and the list goes on and on.......

On the to do list of things to pick up still.......
Winch Mount - I would really like to come across a Boulder Accessories bumper but I am not sure that will happen. I have also considered the ARB bumper or just going with something like DOI or CBPhoto mount.
Winch - Warn VR10000 or VR12000, thinking about going with the 12k due to all the mud I see around here. I like the fact they are made (or at least assembled) in the USA but are priced similar to Chinese made winches. Also plan on switching the line out for 3/8" Viking synthetic winch line and hawse style fairlead.
Rear Bumper - Thorparts rear bumper with the optional 2nd tow hook. Will either go with a Rockhard or an OEM H2 spare tire licence plate mount.
ARB Safari Snorkel - Already picked up a spare painted fender for when I decide to.

Other stuff I am considering but not 100% sure on..............
ARB Roof Rack
Powder Coating The Current Wheels

HOLY SHEEP 08!

WOW, now that's quite a list! I likey! :thumbs:

 

[UT-H3]

So, this being a few years old now, can anyone tell me if they still have the clear side marker and turn signal lenses? and if so, Where would one look for them to go about getting some?? Thanks all!!

 

[Nacho]

So, this being a few years old now, can anyone tell me if they still have the clear side marker and turn signal lenses? and if so, Where would one look for them to go about getting some?? Thanks all!!

The front turn signals are Part #s 15816666 and 15816662. You should be able to order them through a dealer or a gm parts website.

 

[UT-H3]

Awesome. Thanks Nacho:cheers: