H4O light bar brackets available now

[SuperBuickGuy]

These are for CURVED 50" light bars - however, it's simple for me to make them for up to 52.5" brackets. The nutserts and installation will be on the buyer - because where it lands is up to taste. These come in either Aluminum or Stainless steel. If you want to paint it, buy the aluminum. They will be $100 a pair including shipping, with delivery in a week or so. No, I'm not getting rich on this, and a small portion of the proceeds (very very small) is going to support the forum.



and the lettering may change - this is a production beta...

to order, simply pm me with which material you would like it made out of. IIRC, the stainless is 1/8" and the aluminum is 3/16" thick.

 

[RamRod]

Do they need a bend in the bracket at all to blend in with the lines of the cab? Or do they mount up just like that?

 

[SuperBuickGuy]

They will be bend similar to the G2 mount that's currently on my H3. I will bend them for either 50 or 52.5" bars - but you have to tell me which you need; otherwise, I'll presume the 50" bar.
This is a two stage process, my friend cuts them out with his laser, I bend them in my press.

 

[IISPEEDYII]

dangggg, i would have bought these had i know you were making them, i got my g2 like 3 weeks ago

 

[RamRod]

They will be bend similar to the G2 mount that's currently on my H3. I will bend them for either 50 or 52.5" bars - but you have to tell me which you need; otherwise, I'll presume the 50" bar.
This is a two stage process, my friend cuts them out with his laser, I bend them in my press.

Okay thanks!
I'll figure out what kind of bar I have coming and let you know
I'll go with an aluminum unit that I'll paint black

 

[SuperBuickGuy]

coolio

 

[Hills]

I wish you had posted this last week! I ordered the g2 brackets, however his site is down, he does not answer his phone, and has not responded to my requests for tracking. If this falls through, I will be filing a PayPal claim, and ordering from you.

 

[RamRod]

Just made an Ebay offer on a 50" curved bar, I'll let you know the size I need shortly!

Cheers!

 

[SuperBuickGuy]

excellent!

 

[Hills]

Well still no answer from G2Leds on tracking for my order. I guess I may be SOL. What sort of time do you need to build me a set?

 

[IISPEEDYII]

Well still no answer from G2Leds on tracking for my order. I guess I may be SOL. What sort of time do you need to build me a set?

I never got a tracking order, I wouldn't worry about it. Took about a week to get my mounts

 

[Hills]

Yeah I received them today. They look good. As for tracking it was sent FedEx. Their automated email system does not work. I'm sending him an email with some help. I sell 100-200 orders a day. I am going to offer him some free help on how to automate his shipping process.

 

[SuperBuickGuy]

They are on the schedule to be cut out (not sure what that means, but that's the update from the shop)

 

[SuperBuickGuy]

The final design is approved and they are going to laser them out on Monday... it shouldn't take me long to do the bends and get them ready for shipment...
Thank you for your patience.

 

[RamRod]

Awsome! I still haven't picked out a curved bar yet... Other mods on the brain


Sent from handheld smoke signal device

 

[Ghostbuster]

Is there a good reason why we can't use a straight bar?

 

[SuperBuickGuy]

the bracket is too short - the straight light would hit the windshield.... with that said, if there's enough demand, it wouldn't be terribly difficult to simply make them 2" or so longer.

 

[SuperBuickGuy]

...and here they are...




PM me for purchasing, they're $100 delivered. Of course, if you're anywhere but the 48 lower States there will be an actual-cost-surcharge.

 

[RamRod]

Send them in the mail to me mark as gift so I can save on shipping boarder fees! I want my name on one of these but I need to get off my a$$ and order a curved bar so I know the size... Been focusing on my OBA setup and getting my Hutchinson's up and running


Sent from handheld smoke signal device

 

[edwardreyes69]

I really like these brackets and was wondering if your still selling them. Really interested

 

[SuperBuickGuy]

Maybe, PM me - my laser guy retired, but I may still be able to get them.

 

[edwardreyes69]

I'm new to this site so I'm not exactly sure how to pm you. I made it so I can get these brackets haha. Can I get a little help on how to pm you?

 

[SuperBuickGuy]

left click my name, click "private message", follow prompts.