Need help finding a part...

[Hans3T]

I've spent a good deal of time trying to find a part for the H3...not even sure if its available. I am looking for the base plate for the roof marker lamp package. Just the plastic plate. Like I say, I'm not sure it even has its own part number, but any help locating one would be appreciated. Thanks!

 

[Zach]

The plastic base plate was only serviced as part of the lamp package. And the lamp package is now discontinued.

 

[Hans3T]

Darn. I sort of figured as much, but was hoping they might sell the plate. Seems like the lights are readily available, but the entire kits are scarce and costly.This begs another question: How difficult would it be to create something that imitates that base plate? Only the 3 middle marker lamps use it, as far as I know. The two corner lamps drill into the tip of the A pillar I believe.

 

[f5moab]

If you are doing roof marker lamps just drill five separate holes into the roof and install actual marker lamps
For example....http://www.trucknvans.com/Exterior-Truck-Lighting-s/957.htm

Just run the wiring under the roof, above the headliner. And, make sure to measure twice before cutting.

 

[HIROLA]

I'm with F5. I put in some smoked marker lights for a chevy pickup. ~$30. Totally worth it and it adds a different look than the stock lights.

 

[Hans3T]

What number did you wire the lights into in the fuse box?

 

[Bigunit]

Hans, if it will help. I have the insatllation instructions for the OEM roof marker light kit. if you want a copy, let me know.

 

[theBroken]

I've spent a good deal of time trying to find a part for the H3...not even sure if its available. I am looking for the base plate for the roof marker lamp package. Just the plastic plate. Like I say, I'm not sure it even has its own part number, but any help locating one would be appreciated. Thanks!

Could you list all of the places that you looked for this at? I'm just curious.

 

[Hans3T]

I checked on your site as well as Googling "hummer h3 marker lamp base plate" which only returned a few relevant results that led to dead ends. I also checked GM Parts House but I could not find it. That doesn't mean it isn't...I just couldn't find it. Do you have any for sale, Brodie?

 

[Gunner_45]

Damn Brodie...............


:giggle:

 

[Hans3T]

Hans, if it will help. I have the insatllation instructions for the OEM roof marker light kit. if you want a copy, let me know.

I'd like that, Luis. Thank you! :cheers:

 

[FOXedupONE]

I want marker lamps to but can't find the kit in stock anywhere.