alishapeaches
Probationary Member
- Messages
- 1
- Location
- tn
OKAY , I will give a basic rundown.
2007 h3
new transmission installed
vibration upon acceleration from time to time, goes away at 2 -3 RPM's
When shifting from all wheel drive/4 high into 4high lock it no longer makes a sound as if engaging,
sounds and shifts normal from 4high lock to 4 low lock, and normal from 4 low lock to 4 high lock, no sound
from 4high lock back to 4 normal/all wheel drive. sometimes feels as if im constantly in 4wheel drive.
Another couple weeks go by and I get service stayb, traction control failed, reduced power and the codes
P060E and P0240
My question is, is their a relearn that needs to be done when the transfer case is pulled out and the transmission
is new? is their a accelerated pedel sensor or throttle body relearn that needs to be done? I have unplugged and
cleaned the throttle body.
and also had hand on TCCM while having the 4wheel drives gone thru and it feels to be engaging except going into
4 high lock.
2007 h3
new transmission installed
vibration upon acceleration from time to time, goes away at 2 -3 RPM's
When shifting from all wheel drive/4 high into 4high lock it no longer makes a sound as if engaging,
sounds and shifts normal from 4high lock to 4 low lock, and normal from 4 low lock to 4 high lock, no sound
from 4high lock back to 4 normal/all wheel drive. sometimes feels as if im constantly in 4wheel drive.
Another couple weeks go by and I get service stayb, traction control failed, reduced power and the codes
P060E and P0240
My question is, is their a relearn that needs to be done when the transfer case is pulled out and the transmission
is new? is their a accelerated pedel sensor or throttle body relearn that needs to be done? I have unplugged and
cleaned the throttle body.
and also had hand on TCCM while having the 4wheel drives gone thru and it feels to be engaging except going into
4 high lock.
