• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Opinions On Colt LE 6920 MP-FDE Magpul MOE AR15

Bigunit

Hammer Down!
Staff member
Messages
6,561
Location
Arizona
Does anyone own a Colt LE 6920 MP-FDE Magpul MOE AR15? If so, what's your opinion about this rifle? I'm about to pull the trigger on own (no pun intended) and any feedback would be greatly appreciated.

pix534829124.jpg
 

justin94tt

Well-Known Member
Messages
169
Location
Springfield VA
Don't own a colt M4, but I did build an M4 with a Spike's lower and PSA carbine upper and used the Magpul MOE stock, Handguards, pistol grip, and flip up rear sight. I am happy with the Magpul stuff, it is light weight and durable as long as you buy the USA made Magpul products and not the ones made in China that are made cheaper for primarly airsoft guns and sold on ebay. I would recommend building a M4 rather than buying a Colt for the price difference.
 

Reloader

Well-Known Member
Messages
413
Location
Montana a free state
I would make sure the barrel is rated for both 223 and 556 first. A flip up front sight to go with the rear to allow unobstructed view when using an Eotec is nice. An aluminum quad rail foregrip and a two stage trigger set also are neat additions. Magpull makes good stuff. Lots of cool stuff out there for your AR.
 

Scarsman

Sponsor
Messages
1,561
Location
Monroe, WA
That is a great setup right there. You would not regret it at all. Just add an Aimpoint and a V-Tac sling and you're ready for anything!

Sent from my C771 using Tapatalk
 

machineguneddie

ΜΟΛΩΝ ΛΑΒΕ
Messages
212
Location
Omaha
you cant go wrong with the 6920 and thats a pretty good set up right there.
personally... I like magpuls stocks and Pmags but would go with different hand guards and grips.
and like Reloader stated, make sure to get a 5.56 chambered barrel so you can shoot both calibers out of it, and the flip up front sight would match the back and work with certain optics.

good luck with your purchase and have fun
 
Top