• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

H3 Parking brake won’t set

mrchew

Member
Messages
19
Location
hutto, tx
Anyone had it to where parking brake won’t set? Step down and it springs back. Can this be fixed or just need to be replaced? Any help is appreciated thanks guys.


Sent from my iPhone using Tapatalk
 

Bowser-II

Well-Known Member
Messages
270
Location
Hagerstown, Maryland
Was it working before, I assume yes?

Check the brake adjustment on the drivers side behind the rocker panel. I think it is below the B pillar.


Sent from my iPhone using Tapatalk
 

Bowser-II

Well-Known Member
Messages
270
Location
Hagerstown, Maryland
If that’s not it you’ll need to pull the wheels and brake rotors to check the brake hardware. It’s not hard but make sure you do not lose the holding pins, they like to fly off.


Sent from my iPhone using Tapatalk
 

mrchew

Member
Messages
19
Location
hutto, tx
If that’s not it you’ll need to pull the wheels and brake rotors to check the brake hardware. It’s not hard but make sure you do not lose the holding pins, they like to fly off.


Sent from my iPhone using Tapatalk

It just won’t set but it is engaging the brakes when depressed.


Sent from my iPhone using Tapatalk
 

alrock

El Diablo
Staff member
Messages
10,677
Location
Scottsdale
Had that happen once. I had to replace the parking brake pedal assembly.

I doubt it's the brakes themselves. If the pedal is going down and back up, then the brakes (nor the cable) are not likely interfering with the movement of the pedal. And it's not the brakes that lock the pedal in place - it's the pedal mechanism.
 
Top