• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Replacing valve body

rsm688

Well-Known Member
Messages
234
Location
mississippi
Has anyone replaced the valve body in their auto tranny? I've got a few shift irregularities and do not have any decent transmission shop in the area to diagnose it so I was going to replace the valve body and see if that cleared them up. It's an 06 with 100k miles. It seems pretty straightforward after looking at some videos/tutorials online but wanted to get any thoughts from anyone that has first hand experience doing it on an H3.


Thanks,
Spencer
 

rsc

Well-Known Member
Messages
1,087
Location
Tulsa
Just from what I've seen looking at the pictures and diagrams, it doesn't look hard or involved at all. Looks like a quick swap.
 

CaseyS

Well-Known Member
Messages
755
Location
Louisiana
Very messy. What kind of irregularities are you having? Valve body won't fix things that are aging due to normal wear.
 

rsm688

Well-Known Member
Messages
234
Location
mississippi
What CaseyS said. Tranny fluid just keeps dripping on you the entire time you are doing it. And watch out for small parts.

Thanks guys

I have a hard shift from 1-2 and 2-3. 1-2 is a little harder/more noticeable when going up a hill/from a slow start with a heavy foot, 2-3 is always a little harder than the others and almost feels kinda like RPMs are not matching with where it should shif. The RPMs get up and then a firm shift and it drops down. It is definitely a lot more noticeable going up hills or when I've got to get the momentum going. If I am going very light/smooth or going downhill it is not nearly as pronounced. Any ideas on what this could be? Everything higher than the 2-2 shift is smooth as glass and if I have the RPMs right around 2000 when I hit the shift point its super smooth, if it's higher or lower the shifts are a little harder.

It just feels like the RPM and shift points don't match up right but shifts smooth if I keep the RPMs around 2000 when hitting the points. I was thinking maybe worn valve body and pressures not getting enough to shift when it should or something (I suck with transmissions).


Spencer
 
Top