Roof Light and HID Conversion Kit Questions

[H3Hrly]

Hey guys.

1. Will the 20" "E" Series LED Light Bar fit the Gobi Ranger Roof Rack?
I am thinking of putting it (spot beam model) in the center space along with the U-cradle mounting bracket, and using either 6" or 10" "E" Series LED Light Bars on the left and right spots on front. On the back (L/R) I am thinking of 6" SR-Series Hybrid LED Light bar.

My other plan may be to use DDM lights.
Front Center: 15" or 20" SW LED LIGHT BAR (18-180W) - SPOT. Front L/R: XP2 LED LIGHT BAR (21-210W) - FLOOD
Rear L/R: XP2 LED LIGHT BAR (21-210W) - FLOOD

2. Which HID conversion kit do you recommend for the OEM driving lights and OEM fog lights?

THANKS!

 

[benlaud87]

i dont have the gobi ranger but my roof rack is quite similar. i have a 20" light bar in the center so i dont see why it wouldnt fit yours.

 

[H3Hrly]

Benlaud87, thx for the input. The mounting plate on the gobi rack is only 2" deep & 32" in length. The mounting slits for the center zone are 3" toward center from each vertical support beam. What I wasn't sure on were measurements of the mounting slits of the RI U-cradle mount, and if those slots would align with the slots on the Gobi Ranger rack. While on the RI website I downloaded the product catalog and noticed they sell clamp mounts. The length from the outside of one vertical support beam to the outside of the other vertical support beam is ~19.25" (close enuf for a nuke guy). The length between the mounting clamps shud be ~20.75", which shud give enuf room for the width of the clamp. I think I can mount the 20" E Series light from the top bar of the Gobi Ranger rack and it shud fit. Granted, the outside column of LEDs on each side of the lamp may be partially blocked by the vertical support beams I still think it will fit. STILL, I will call RI on Monday to verify fit of lamp & fit of each mounting system (clamp & U-cradle). Again, thanks. -Ben

 

[benlaud87]

ok, if you need any pictures of the mounted light to help you visualize the size and mounting easier let me know