Roof rack lights question

[algin5109]

I did a quick search and didn't find a lot of info so I gotta ask. How did those of you with roof rack lights actually bring wires into the cab. If there is a roof penetration what did you do to seal it. Pics would be sweet too. Thanks

 

[alrock]

Try this: http://www.hummer4x4offroad.com/for...arker-Installation-OEM-Manual-need-it-come-in

and

http://www.hummer4x4offroad.com/for...rim-repair-and-running-wires&highlight=pillar

 

[algin5109]

Thanks alrock. Any tips to taking pillar off

 

[alrock]

Open the door and pull off the foam rubber trim (it's not glued, you won't damage it). Unscrew the two screws you'll see along the side of the A pillar. The trim is held in place with two additional snaps that are prone to breaking, which is why so many H3s (and H2s) have wind noise problems with the A pillar trim.

Here you can see one of the snaps and it is broken into the female end.

Full view of the A pillar and the two snaps. You can also see where the two screws go, on the right side of the A pillar

 

[algin5109]

thanks