• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

H3 Transmission fluid change help

K0PIR

Well-Known Member
Messages
216
Location
Pierre, SD
I got the pan off of my transmission and found this at the bottom. Looks like a donut so someone can drill a hole and drain the fluid without allowing metal shavings to get into the pan. What is this and should I leave it in there?

Thanks!
63a2ca09efba757b59a642f7306cf479.jpg


Sent from my SAMSUNG-SM-G930A using Tapatalk
 
Last edited:

alrock

El Diablo
Staff member
Messages
10,677
Location
Scottsdale
It's a magnet to hold onto shavings so they do not recirculate or clog the filter. Pull up the magnet, clean it and put it back in the same spot. It's also there as if there are huge chunks you'd see them when dropping the pan.
 

K0PIR

Well-Known Member
Messages
216
Location
Pierre, SD
It's a magnet to hold onto shavings so they do not recirculate or clog the filter. Pull up the magnet, clean it and put it back in the same spot. It's also there as if there are huge chunks you'd see them when dropping the pan.

Got it. Cleaned and put back.

Donut magnet :giggle:

BTW, whoever thought of the kiddie pool to drain the oil into is genius.

Thanks!
 

650Hawk

Well-Known Member
Messages
548
Location
SoCal
BTW, whoever thought of the kiddie pool to drain the oil into is genius.
OMG! What a brilliant idea! I've been wanting to do my trans for awhile now (already did the diffs and the TC), but been putting it off 'cuz of the inevitable mess.
 
Top