Spring Over Parts for H3(T)

[06 H3]

I run the stock sway bar in the stock location with rancho end links.

 

[benlaud87]

thanks, I guess since I have the rancho, ill try leaving it. If that wont work, ill just take it off.

 

[06 H3]

It should work just fine. Last day for 4th of july coupon. Code is SPARKLER and its 20% off on ruffstuff

 

[benlaud87]

I saw that...Unfortunately I ordered my parts a while ago.

Any issues with the rear driveshaft after the SOA?

 

[06 H3]

nope still running the stocker.

 

[SolidusJ]

Found an off road shop near me that would do the SOA kit for $350. I was willing $250 but I could understand with their price, just wanted to know what you guys be willing to pay.

 

[06 H3]

Kit as in parts for the soa? Or as in you supply parts and they do it?

 

[SolidusJ]

I got everything already, just finding it hard to put in the time and get it down so just checking them out.

 

[benlaud87]

Here are a couple cell phone pics I just took of mine

 

[SolidusJ]

Here are a couple cell phone pics I just took of mine

I'm tracking how to install it just checking on the guys that paid to get it done on their cost. Looks great by the way.

 

[derian06]

So with the soa, you have to weld it directly to the frame? I have a metal fab class, and I was going to do the SOA as a project.

 

[Bigunit]

Derian, if you haven't figured out how to do a torsion bar lift on your rig, you may want to hold off doing your own SOA. Baby steps kid, baby steps! Don't you also have to wait until you get your rig back or get a replacement? Your posts are all over the map. Focus on one thing at a time.

 

[derian06]

Derian, if you haven't figured out how to do a torsion bar lift on your rig, you may want to hold off doing your own SOA. Baby steps kid, baby steps! Don't you also have to wait until you get your rig back or get a replacement? Your posts are all over the map. Focus on one thing at a time.

Its 6 weeks until we actually weld, but I suppose you are right. I'll get everything together then i'll look at the SOA.

 

[digglesworth]

Do you have a solution for the front derian? You can't do a soa to an unlifted truck....

 

[digglesworth]

So what are you guys doing for bumpstops in the rear? Extended somehow or not?

 

[derian06]

Do you have a solution for the front derian? You can't do a soa to an unlifted truck....

Get a rancho of course!

But I did not know that, so I guess soa is going to be off for a longg time.

You're always giving me great info and helping me out, thank you sir!

Same goes to you bigunit!

 

[SolidusJ]

:jacked: Looking for the going rate on a SOA done by a shop.

 

[benlaud87]

If they are replacing the stock spring hangar, I would think 350 is pretty low.

Shops around me run at around 100 an hour for shop time so I guess it depends where you live

They're working unbelievably fast if that can be done in 3.5 hours

 

[digglesworth]

I just wonder if shops have the capability to do all this on their own or if you have to walk them through it.

 

[RamRod]

I got quoted $400 in labor from a shop that knows what they are doing, he built a SCORE truck that won its class in 2013... So do the currency conversion $350 sounds fair


Sent from handheld smoke signal device