• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

ARB H3 front bumper for sale

zackcrum

Well-Known Member
Messages
543
Location
Corinth MS
So a gut on instagram messaged me wanting to sale a front arb bumper with a smittybuilt xrc9500 winch and the ARB park lights installed on it, doesn't have the fog lights. He is asking 1000 or best offer. His phone number is 8178881357. Located in plantation Florida. I'm not sure if he will ship but its worth asking him.
 
Last edited:

derian06

Red Rockett
Messages
1,866
Location
Madison, AL
So a gut on instagram messaged me wanting to sale a front arb bumper with a smittybuilt xrc9500 winch and the ARB park lights installed on it, doesn't have the fog lights. He is asking 1000 or best offer. His phone number is 8178881357. Located in plantation Florida. I'm not sure if he will ship but its worth asking him.

Considering this.
 
S

SedonaBound

Guest
Nice deal for someone within reasonable driving range.
 
H

H3Ray

Guest
Maybe another really dumb question but how is the ARB Bumper better or different than the stock H3 Brush Guard? Reason asking I'm looking to buy the Warn Winch and a Mount-Platform like the CB Photo Winch Mount. I would love to install my Winch inside the stock bumper but I don't have the know-how, reason I am thinking about the ARB Bumper.

Form a cost point of view ....

Warn Winch: $950.00 + shipping
CB Photo Mount: $520.00 + shipping
Labor Install: $ ____

Thx.
 
Last edited by a moderator:

zackcrum

Well-Known Member
Messages
543
Location
Corinth MS
Maybe another really dumb question but how is the ARB Bumper better or different than the stock H3 Brush Guard? Reason asking I'm looking to buy the Warn Winch and a Mount-Platform like the CB Photo Winch Mount. I would love to install my Winch inside the stock bumper but I don't have the know-how, reason I am thinking about the ARB Bumper.

Form a cost point of view ....

Warn Winch: $950.00 + shipping
CB Photo Mount: $520.00 + shipping
Labor Install: $ ____

Thx.
You are better to replace it with the arb bumper.
 

zackcrum

Well-Known Member
Messages
543
Location
Corinth MS
Maybe another really dumb question but how is the ARB Bumper better or different than the stock H3 Brush Guard? Reason asking I'm looking to buy the Warn Winch and a Mount-Platform like the CB Photo Winch Mount. I would love to install my Winch inside the stock bumper but I don't have the know-how, reason I am thinking about the ARB Bumper.

Form a cost point of view ....

Warn Winch: $950.00 + shipping
CB Photo Mount: $520.00 + shipping
Labor Install: $ ____

Thx.
You are better to get the arb. It's better in every way except weight.
 

amrg

Well-Known Member
Messages
2,317
Location
Qatar
An arb weighs approx 180 pounds? Its pretty strong steel bumper, the H3 bush guard is made from thin tubing, you can re shape it by pulling it with one hand, the arb not really.
Google arb bumper accidents, so many pics of people having direct impacts with them and how they survive.
Anyway for a hidden winch setup one of the forum sponsors has one, easy to instal i believe. Check it out.
 

Cyouincourt007

Pavement Prince
Messages
542
Location
Miami,Fl
Hello gents, this is not too far up the road from me. I googled the arb and looks sweet. Any idea if the winch sticks out on this setup or would it be concealed etc. appreciate any input. Might give the guy a call tomorrow and see whatsup. Thanks again for the heads up and any input is much appreciated. Still rolling stock here :gaah:
 
H

H3Ray

Guest
So many pics of people having direct impacts with them and how they survive.

I hear ya but will the air bag be affected? Seems to me the blunt force impact of the ARB would transfer all that force the people inside .... kinda like there is no crush zone. Crush zones are good. Does this make any sense?
 

amrg

Well-Known Member
Messages
2,317
Location
Qatar
I hear ya but will the air bag be affected? Seems to me the blunt force impact of the ARB would transfer all that force the people inside .... kinda like there is no crush zone. Crush zones are good. Does this make any sense?
The crush zone in an H3 is in the frame rails, not the bumper.
As for airbag compliant, Arb are the only company that does crash testing and they comply with airbag regulations.
 

Best4x4

Well-Known Member
Messages
1,042
Location
Vidor, TX
ARB bumpers are without a doubt very stout, and the craftsmanship/quality is in a league all of it's own. They're fully Air Bag Compatible, fit is perfect, and so is the finish. The winch is completely hidden besides the solenoid box (however you can access the winch thru several holes in the bumper & with a Warn M8000 you have to rotate the clutch/brake housing so the handle is accessible). I've owned several ARB bumpers throughout the years and I've never had a single issue with any of them. In the TX hill country it stopped me from totaling my rigs from silly deer! I hit several deer with an ARB and I just had to wash off all the DNA. Not a single scratch or dent!!

One of the huge selling points on my Alpha was the fact it already had an ARB. Carfax showed zero accidents, but honestly I think the previous owner had a bit of a boo boo to the RF since the RF headlight was completely blown out the back when I bought it. Instead of buying the OEM stuff they apparently went with an ARB Bumper. I've learned that Carfax is a great safety net for non gearheads, but in the real world a Carfax report can be completely false. I'd rather spot stuff like that and know what I'm getting into vs a cover up car where it's just made to look pretty and it's really a complete wreck.

I also had a friend with an 06 Rubicon and he was hit nearly head on (from an idiot going the wrong way on I-10 in Houston), he was hit, then half his Jeep flew over the center concrete wall. The drivers door was ripped off, and when he came to a stop he was hanging over the Westbound lane in his seat!! The front of the Jeep was able to maintain it's shape due to the ARB bumper and it deflected the damage of the hit head on. It didn't look anything like a Jeep after it was over, but besides a small crease on the LF side of the ARB bumper it retained it's shape perfectly!

ARB's are more $$$$ vs other bumper makers, but in the end you get what you pay for and my safety along with my friends or family that ride with me is priceless!
 

4speedfunk

Well-Known Member
Messages
4,250
Location
Tardville
Hey Best...

Does your ARB take the 06-07 front skid or the 08-10 version? I had a guy wanting a THORparts front skid for his ARB front bumper, and there seems to be some confusion on which version the ARB uses. I'm not totally sure they didn't make them both ways but, I would like some input from ARB owners on this. It seems to be a reoccurring question around the THORparts shop.

No doubt ARB makes a great product. Its just too heavy & bulky for my intended use. So I traded-off some corner protection for smaller size, less weight, and full winch access. Any other vehicle and I wouldn't be so hard-core about the weight but, the H3 is an absolute pig. Anytime I can shed some weight, I will. It becomes a better off-roader with every pound I remove from it.
 

Best4x4

Well-Known Member
Messages
1,042
Location
Vidor, TX
Funny you should ask lol. I got your skid in last night and ran out to install it, but it does not fit an 08-10 H3/H3T or a vehicle with an ARB Bumper (mine just happens to be an 08 with an ARB haha). The ARB uses 08-10 Bumper/Skid holes (unless you can specify when ordering an ARB, which I don't think so). I really really really wanted to swap out the OEM skid on my 08 Alpha since it does not match up all that well with the ARB. Kinda looks like I have a set of little wings just behind the ARB Bumper....

No biggie though I just put the skid plate on my wife's 07 and removed her OEM H3 Stamped skid. Part of my Christmas Bonus I guess was upgrading my wife's H3 as well haha.
 
Top