Crossmember bushing

[jsuggs]

The top half has disintegrated. It making a god awful noise when you apply acceleration from the housing hitting the crossmember. Where can I get one of these bushings? I'm coming up short even on eBay. Seems easy to change. Any ideas besides the dealer? They only sell the entire crossmember with bushing.

 

[K0PIR]

Scorpworks and Outfitter Design have a fix. Search and you'll find it. Here's one link:
http://www.hummer4x4offroad.com/forum/showthread.php?t=2314

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[jbrand11]

Been calling them for 6 weeks now and its always we will call next week with the parts to be shipped. Is there any better way to get a hold of them? I need a diff cossmember support and two pairs of front axle support brakets....any help would be greatly appreciated.

 

[rascole]

Send him a PM. All I can say is they are worth the wait.

 

[napalmsticks]

Do you have access to a press? I did mine myself using this:
http://www.amazon.com/gp/product/B00165ZXZ0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

ETA: This kit also worked for replacing the bushings on my front axle brackets.

 

[rascole]

Do you have access to a press? I did mine myself using this:
http://www.amazon.com/gp/product/B00165ZXZ0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00

ETA: This kit also worked for replacing the bushings on my front axle brackets.

Is this kit and exact fit?

 

[H3nightrod]

I might have a spare if you need.

 

[napalmsticks]

Is this kit and exact fit?

You will need to trim the length for the cross member bushing but the diameter is a perfect fit. For the front mounts you will need to trim the length and sand down the diameter. I have had them in for around 10k miles and they are holding up great.

 

[rascole]

You will need to trim the length for the cross member bushing but the diameter is a perfect fit. For the front mounts you will need to trim the length and sand down the diameter. I have had them in for around 10k miles and they are holding up great.

I already have the upgraded bushings from Scorpworks. Just curious a bout your set up.

 

[jbrand11]

Send him a PM. All I can say is they are worth the wait.

Sent pm yesterday, no answer as of 18:24 today. I will try and wait as I agree they look worth it but that amazon fix is something I'm going to get coming my way while waiting and just in case they never answer

 

[jbrand11]

I might have a spare if you need.

I appreciate the offer but I want them all to bee the same

 

[Zach]

Either contact Alrock or Bigunit, they will get you in touch with Scorpworks. From what I've heard, he's had a ton going on lately.

 

[4speedfunk]

Or just make your own.

 

[napalmsticks]

Or just make your own.

^This... :cheers:

 

[napalmsticks]

I already have the upgraded bushings from Scorpworks. Just curious a bout your set up.

 

[rascole]

Either contact Alrock or Bigunit, they will get you in touch with Scorpworks. From what I've heard, he's had a ton going on lately.

Thought I read on another thread he was on vacation or somthing.