-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
-
The Swap Meet is not a regulated market, and buyers/sellers are not screened. Please do your homework before agreeing to anyone for any purchases or sales. If you have any questions about the user, please contact @Alrock via private message and I will attempt to provide any relevant information about the person, including location based on IP address. This is not a guarantee or promise of delivery but the addtional information may be helpful to you in your transaction. There are no guarantees here so use your judgement. Consider payment options like PayPal that have recourse (only when treated as a sale, and not as % between friends). Scammers will often use Zelle or ask for PayPal between friends because you cannot reclaim the money in the event of fraud or non-delivery. If a user has just joined and/or has few posts they should be viewed very cautiously.
WTB frame plates
- Thread starter Ron46
- Start date
SolidusJ
Well-Known Member
- Messages
- 2,028
- Location
- FT. Carson, CO
Someone might have a set laying around, I was lucky to get mine.
SolidusJ
Well-Known Member
- Messages
- 2,028
- Location
- FT. Carson, CO
Your talking about the one around the front D-rings or the UCP? I have the UCP plate.
[/IMG]
cgalpha08
"Like Nothing Else"
- Messages
- 3,720
- Location
- Indianapolis, IN
I have a set that i can take some pics of for you, but im keeping them 
Sent from my DROID BIONIC using Tapatalk 2
Sent from my DROID BIONIC using Tapatalk 2
- Messages
- 10,677
- Location
- Scottsdale
If you can provide a pic, with measurements, then perhaps we can find a fabricator that would make a batch of these for a group buy.
Paladine71
ΜΟΛΩΝ ΛΑΒΕ
- Messages
- 1,483
- Location
- Tallmansville, WV
If you're talking about the plates that weld onto the UCP, I'd be interested in a set.
Ron,
You're talking about these frame plate supports that Ridge Demon used to supply for those who wanted to add more strength and support to the OEM frame rail supports to deal with the added weight and stress on the OEM frame rail bumper supports - that are really small and thin and have been bent by some.
http://www.hummer4x4offroad.com/for...rt-install-instructions&highlight=frame+plate
If anyone has some good pics & measurements of these, I can see if Preferred Chassis can make a batch of these for a group buy. I had a set but already had them welded onto the T before I put the BA bumper and winch on.
You're talking about these frame plate supports that Ridge Demon used to supply for those who wanted to add more strength and support to the OEM frame rail supports to deal with the added weight and stress on the OEM frame rail bumper supports - that are really small and thin and have been bent by some.
http://www.hummer4x4offroad.com/for...rt-install-instructions&highlight=frame+plate
If anyone has some good pics & measurements of these, I can see if Preferred Chassis can make a batch of these for a group buy. I had a set but already had them welded onto the T before I put the BA bumper and winch on.
I would want to check with Brodie before "I" attempted to make those.
Brodie and I talked a long time ago about those and if I could have some made since he told me what he was having to pay.
If I remember at the time he said that was some sort of structural steel instead of the stuff I have the skids made of.
The fabricator at the time was hesitant to quote me because he said he would have to special order just a small quantity of material and make a few.
Take that for what it is worth or bs but if the same steel they stock at the new place where I hope to get the skids made will work, I just left a message and expect a call back about the skids, today. I have a set of the frame supports I have not installed as I was waiting for some other stuff to be made and wanted to install it all at the same time.
I don't expect a lot of these to be sold but maybe while they were cutting my skids they could lay out a few sets with the same order.
OR if someone else can get it done, go for it.
I will try Brodie's email I have and see if he can be contacted, before I run with it.
Hell at this point don't hold your breath.
I called the E-Coat place as well today about the skids and they are expecting them when they get made.
I also will have them coat my rock rings and see how that stuff holds up.
Brodie and I talked a long time ago about those and if I could have some made since he told me what he was having to pay.
If I remember at the time he said that was some sort of structural steel instead of the stuff I have the skids made of.
The fabricator at the time was hesitant to quote me because he said he would have to special order just a small quantity of material and make a few.
Take that for what it is worth or bs but if the same steel they stock at the new place where I hope to get the skids made will work, I just left a message and expect a call back about the skids, today. I have a set of the frame supports I have not installed as I was waiting for some other stuff to be made and wanted to install it all at the same time.
I don't expect a lot of these to be sold but maybe while they were cutting my skids they could lay out a few sets with the same order.
OR if someone else can get it done, go for it.
I will try Brodie's email I have and see if he can be contacted, before I run with it.
Hell at this point don't hold your breath.
I called the E-Coat place as well today about the skids and they are expecting them when they get made.
I also will have them coat my rock rings and see how that stuff holds up.
auggie mathis
Well-Known Member
- Messages
- 119
- Location
- suger land tx
I will gladly prepay for a set
cgalpha08
"Like Nothing Else"
- Messages
- 3,720
- Location
- Indianapolis, IN
Hope this helps.
Sent from my DROID BIONIC using Tapatalk 2
3/8" steel, if my memory still serves me well!