• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

H3 Check transmission fluid condition

altide8

Active Member
Messages
32
Location
Alabama
What conditions do you guys check your transmission fluid in? I assume after the engine is warm but I’ve read mixed reviews about checking it in park. Cycling through p-r-d. Curious to hear what you guys have to say. I had my trans rebuilt 6 months ago. Think it could be leaking


Sent from my iPhone using Tapatalk
 

mjferencak

Well-Known Member
Messages
308
Location
Elbert, CO
Check it while its in gear. That will give you the true level. Your torque converter take a good bit of fluid to function.


Sent from my iPhone using Tapatalk
 

JPaul

Well-Known Member
Messages
2,436
Location
Way up north, UT
Owner's manual has the directions. Pretty sure it's it needs to be at operating temperature and parked on a level surface, cycle through all the gears, stopping at each one for a few seconds or so, then back to park, then check while it is still running.
 

alrock

El Diablo
Staff member
Messages
10,677
Location
Scottsdale
As I recall, warmed up and in gear is ideal. Putting it in Park is more of a manufacturer safety requirement vs. the best way to check levels. But either one should be sufficient, and you can do it by yourself if it is in Park.
 

4speedfunk

Well-Known Member
Messages
4,250
Location
Tardville
Fluid should be red...not maroon or milky. Also take a sniff of it...it should not smell burnt.
Hot tranny, level ground, in park.
 
Top