H3 Oil Drain plug

[Medic_Morgan]

Anyone know the size, thread depth/pitch? Mine is stripped and I'll need one ASAP. Thanks guys(and gals)



Sent from my secret lair bwaaahhahahahah

 

[alrock]

Checked http://www.oreillyauto.com/site/c/s...lug&year=2007&make=Hummer&model=H3&vi=1433659 and they indicated it's a M12-1.75. I suspect your local auto parts store will have them in stock

 

[Medic_Morgan]

Thanks Alrock! I was way off on what I was looking at.


Sent from my secret lair bwaaahhahahahah

 

[Dennis]

I got the same one/size and it had the magnetic tip on it too..as I believe these do alrock posted...I got a couple to rotate....Now I have to take a 15MM socket with me too, along with the 13MM for all the other skid plate bolts.

 

[rascole]

Read this thread, good info.
http://www.hummer4x4offroad.com/forum/showthread.php?6111-Fumoto-Oil-Drain-Valve&highlight=fumoto

 

[JoeFireGuy]

I was thinking about replacing my plug with one of those drain valves...I had one on an F150 years ago, made changing the oil soooo easy. I looked around a bit and seems like Fram still makes the Sure Valve. (SD-4) With the turbo on my H3, there's a pipe from the intercooler that runs across in front of the filter and plug. It would be nice to have some easier access when droppin' the erl. Joe

 

[Dennis]

never mind...I was reading from the wrong end..:roll:

 

[mantracker]

Thanks Rascole. After reading that thread, I ordered one of those today. That will definitely make the oil change much cleaner and qiucker.