I hope to have 10 sets in about two weeks or more. Just a little slow this time. Post up if you need them, I don't! lol
Laser cut from 1/4 pickled steel 10/10. The brackets are indexed in a slot for alignment and strength and welded on top and bottom. Gussets on the taller one. Holes in brackets are elongated for wiggle room installing. Bottom holes are big enough for a heavy impact socket.
I media blast them so they are ready to paint.
New design change has the rear skid angle "start" back 1 1/2" to allow extra clearance for bigger shock mounting eyes (Bilstein) but I am running the old style with Bilsteins, no problem.
$165 for a pair of rear and front hanger skids. Including shipped flat rate, 3 day to most anywhere (as long as the Post Office stays in business)
Install thread
http://www.hummer4x4offroad.com/for...-SKIDS-Hunner-EXtreme-install&p=2973#post2973
Without
Laser cut from 1/4 pickled steel 10/10. The brackets are indexed in a slot for alignment and strength and welded on top and bottom. Gussets on the taller one. Holes in brackets are elongated for wiggle room installing. Bottom holes are big enough for a heavy impact socket.
I media blast them so they are ready to paint.
New design change has the rear skid angle "start" back 1 1/2" to allow extra clearance for bigger shock mounting eyes (Bilstein) but I am running the old style with Bilsteins, no problem.
$165 for a pair of rear and front hanger skids. Including shipped flat rate, 3 day to most anywhere (as long as the Post Office stays in business)
Install thread
http://www.hummer4x4offroad.com/for...-SKIDS-Hunner-EXtreme-install&p=2973#post2973
Without
Last edited:



