• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Key Stuck in Ignition Please help Me

Billy

Member
Messages
21
Location
Nevada
My 09 Alpha. The key is stuck in ignition and I cant remove it. Battery was fine, never any problems. Because of this I am late for my job and maybe I'm fired from my job. Obviously my battery is dead. What can I do?


Please help me.
 

derian06

Red Rockett
Messages
1,866
Location
Madison, AL
My 09 Alpha. The key is stuck in ignition and I cant remove it. Battery was fine, never any problems. Because of this I am late for my job and maybe I'm fired from my job. Obviously my battery is dead. What can I do?


Please help me.

Get a jump asap
 

rsc

Well-Known Member
Messages
1,087
Location
Tulsa
Ask your boss for compassion and forgiveness. Explain about the GM ignition recall and say it will never happen again while outlining a plan to fix the root cause. (And get your battery on a charger while you are replacing your oem battery terminals.)
 

Cyouincourt007

Pavement Prince
Messages
542
Location
Miami,Fl
Dang, hope it went ok at work. I keep a booster pack in the back of my 3 that has jumpers and also has air compressor, light etc.
 

Cyouincourt007

Pavement Prince
Messages
542
Location
Miami,Fl
You do have the shifter in Park, right?

i once had a girl I helped that was stuck at the exit gate key fob station. She said the car wouldn't start etc since she turned off car and took keys out to swipe the fob. Turns out when I walked up and saw it wouldn't start I looked down and she was still in drive so I told her. Quick fix and she was on her way!
 

USMC_315

Well-Known Member
Messages
590
Location
Northern VA
same thing happened in my deuce a while back, I turned the car back on, drove it around the block and it came out. unfortunately the issue repeatedly came up and I had to eventually take it to the dealership for a fix. apparently the wires are common to be worn out in there. sounds like the same issue
 
Messages
1,248
Location
New Jersey
If it's the same as the H2, it's the wires that are attached to the connector clip that is attached to the shifter, that with time, they wear out and break off, causing the key to stay stuck in the ignition, this of course happens as well, if your battery is bad or dead!
 
Top