Need help!

[Bananatank]

Okay guys so today I started hooking up my 2 10' subs with my rocksford god gate punch 400w amp and got just about everything hooked up..then I ran into a problem[emoji58]. This is the first time I've ever hooked up subs and my uncle was helping me out, we got everything hooked up until we go to wire the rc cables into the STOCK radio. Little did I know the rc cables have nowhere to plug into the radio so is it possible to run these cables in the stock radio... Or do I need to go get some sort of converter or something? Advice is helpful here considering I'm an amateur here. Thanks all

 

[Bananatank]

Never mind got my answer [emoji106]

 

[Gunner_45]

I assume you will be doing a show and tell on this little project, yes?

8^)

 

[Schwarttzy]

I assume you will be doing a show and tell on this little project, yes?

8^)

I'm interested in getting to see this too

 

[Bananatank]

I will do one if yall would like to see it[emoji106]

 

[Renagade132]

So where you able to hook up the Amp, and just not the speakers? Because there should be direct out lines from the amp to hook up the speakers/kicker box. And does your truck have a factory Amp? Because you might be able to disconnect that, and tap right into the factory Amp wires. Just don't forget to fuse anything you connect, especially an Amp!

 

[H3HummerLineX]

Just use a scosche line out converter wired to your speakers, run the blue amp wire to acc power, chassis ground and main power to the batt with fuse.


Sent from my iPhone using Tapatalk

 

[Bananatank]

Finished up today they're plenty loud enough for me and I did use one of those line out converter.