Cortinas316
Well-Known Member
- Messages
- 86
- Location
- san antonio tx
All, wondering if you guys can help me narrow down an issue that popped up in the say few days. I have noticed that when I am parked or in gear at a stop and I turn my wheel ldriver I hear wwhat sounds like a hard rubbing sound and I can feel it slightly in my steering wheel. Nothing is rubbing in the wheel well so I'm thinking either tie rods or bushings. Possible power steering pump. When I am in drive or rolling...turns are not a problem and I do not noticed the rubbing sound. Turning wheel to the right doesn't seem to produce the sound. I just replaced my Driver wheel hub no more than 3000 miles ago. When this was done Firestone said that I had a lot of play in my upper control arms and my tie rods needed replacing. I ffigured this was half true and post likely them ttrying to up sell me.
My concern is I have a full blown off road trip planned on the 25th and really don't want to something to happen on the trials.
Can anyone either give me some insight or past experience with the same problem? I'm running 35" nitto mud grapplers on 18" wheels and no other mods in that area. Had rain the last few days but haven't been mudding but have ran their higher water a couple of times.
Thanks guys
My concern is I have a full blown off road trip planned on the 25th and really don't want to something to happen on the trials.
Can anyone either give me some insight or past experience with the same problem? I'm running 35" nitto mud grapplers on 18" wheels and no other mods in that area. Had rain the last few days but haven't been mudding but have ran their higher water a couple of times.
Thanks guys