• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Tires for my H3

TexasDoll361

Probationary Member
Messages
2
Location
Hoston, TX
Quick question -
I just purchased some 20x10 -25mm wheels for my Hummer, what's the biggest tire I can go without having to level or lift my truck?
:huh:
 

JPaul

Well-Known Member
Messages
2,436
Location
Way up north, UT
33" overall diameter on stock width wheels fit fine, you can even run 35" with very minimal rubbing on stock width rims, though I'm not sure with a 10" rim width, stock is only 7" I think. If I recall correctly the 35's most people run are 315mm wide, which is about 12.4 inches wide. So you might be able to go with something that wide on a 10" rim. Maybe something in 315/50R20? Or 35X12.5R20? There's several good offroad tires available in those sizes.

Not sure about your offset though, someone else might know better.
 

amrg

Well-Known Member
Messages
2,317
Location
Qatar
Quick question -
I just purchased some 20x10 -25mm wheels for my Hummer, what's the biggest tire I can go without having to level or lift my truck?
:huh:
Thats alot of offset!

I run -10mm with the smaller sized 35s, the tires rub on the fender flares I have installed. I also have a 1" body lift.
With your wheels your tires will stick out a further 15mm and I believe without a body lift you will get rubbing on your fenders if you run 35" tires. With a body lift it will depend on your selection of 35s (some brands measure 33.5" mounted while others measure upto 34.5").
 

GreatDaneHummer

Well-Known Member
Messages
994
Location
Chicago
I run 35.20x12.40R17 Pitbull Rocker XOR Radials on 17x9 wheels and I have bad rubbing even with the 1" body lift. Everytime I get full compression they are rubbing. They ripped off my splash guards already.
 
Top