Torsion bar crank

[sonicstage]

Hello all so my torsion bar is cranked to 24 instead of 23.5 does that half inch make a difference in driving? If so do I need to lower the t bar half an inch? Not sure if that half an inch makes a big difference when driving over things


Sent from my iPhone using Tapatalk

 

[scoreh3]

Yes it does . 23.5 is the tallest you can go before you start having drive line issues . Yes that extra 1/2 inch makes a difference in the angles of the half shafts and how long they will last.

 

[sonicstage]

Thanks man I'm a newbie and just learning about all of this always appreciated


Sent from my iPhone using Tapatalk

 

[Pappibri]

Some people run 24. I guess it depends to on if your running 35's as well. Heavier tires is more stress as well. The wise ones say 23 1/4 is the sweet spot. I have mine at 23 3/4 because I have extended shackles on the rear.

 

[sonicstage]

I do have 35 inch tires however my steering wheel doesn't sit straight it sits at 1 and not 12 so I'm going back to the tire place today and have them set it to 23.5


Sent from my iPhone using Tapatalk

 

[sonicstage]

It was at 25! So I'm lowering it down to 23.5 tonight I knew something wasn't right when driving it I could feel something weird thank god I didn't take it wheeling this past weekend or I feel something could have happened


Sent from my iPhone using Tapatalk