Search results

The other night I got the old accessory bracket and pump/reservoir out and mocked up the new bracket system. Old: New bracket from goatbuilt:

Well time for the next mod. I was doing an oil change and noticed the power steering was leaking by the cooler. Followed it up and its coming from the reservoir return fitting. On the factory reservoir its a plastic nipple with a hose barb. This is the second time I've had a leak there. Due to...

For droop, you could put a limit strap in, or clearance the control arm with a grinder for the small bit that contacts it. What bushing material are the lowers made out of?

Not to derail this too much, but what roadblocks? I know you mentioned something about the CV shaft hitting the control arm, but was there something else?

Nice Chris, congrats on the new ride! Can't wait to see what you come up with for the IFS diff

I am actually considering remote mounting mine up in the engine bay anyway. I noticed the solenoid box blocks a decent amount of air to the radiator. Im not overheating, but I figure trying to get the most possible air flow cant be a bad thing.

Randy, can you mount it off to the side of the winch? my smittybuilt can be mounted on top or on the left side. Idk if that winch has a provision for that, but it allowed me to not have to cut the grille up.

Congrats chris!

Mainly just to have a source for parts down the road. At some point, even used h3 parts are going to be so junky they won't be worth the effort of installing them, and remans will stop, junkyards will dry up. So if something else works, why not.

The brake caliper comparison will be easy to do, can get relatively cheap ones on ebay for both models, then its just measuring and possibly fitting them up. The master cylinder/abs pump will be more difficult, as i think when you replace that with a stock one, you have to have it programmed by...

All, Starting a discussion here regarding the compatibility between H3 brake components and Toyota components. Below are a series of pictures of the Hummer H3 master cylinder/abs pump compared to a Toyota one. They are nearly identical. I believe Aisin made them for Toyota, and Aisin also made...

Some more pics from windrock.

Snagged a set of mirrors for $50, and another pass mirror for $20. Did some surgery on the mirror cap since its all nice and line-xed and I wanted to re-use it.

So i think my official plan is this. Pull the dent out to get the fender to seat, and clear coat the baremetal so it doesnt rust. Then this winter take it to a body shop and have them fix the doors. I know most people will say to just leave it, but these doors are very very nice, they only have...

Went to windrock with the hummer club. Got some damage. Passenger mirror, gone. Fenders popping off. Both passenger doors dented and scraped

Added an anti-wrap bar. With the 40s its needed.

CJ. Badlands industries out in Nevada rebuilds them. Not sure the price, but 4-5k i think? Might be the easiest way to get a direct swap in without monkeying with anytbung significant

I seem to recall that Steve (reloader) mentioned that our calipers are the same as some toyota model calipers, Fj cruiser or 4 runner of some years. I can't remember the specifics though. Could be work investigating that and finding out if they work and are a suitable replacement.

I want to say CJ has one or two Thorparts bumpers still laying around, but dont quote me on that. Move ARB Iron bull

I had one made from here https://www.ozgaugepods.com/ I bought a new a pillar trim piece and shipped it to him and he shipped it back with the pod work done. Its alright, the angle is a little difficult to get right, so they are pointed a little "up". Ill see if I can dig it out, i never...