• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

steering rack

  1. D

    Rack and Pinion install directions

    Hey everyone. I have never replaced a rack and pinion on a vehicle and with 255,000 miles on my H3 and leaks on both sides I think it's about time. I was curious if anyone has any instructions on how to do it? I'll be replacing the power steering pump/reservoir along with the hoses as...
  2. E

    Need help on an H3T steering rack replacement

    Ok folks, I have an H3T, bought it new, now at 166K mi. Steering rack bushing finally went, and I’m replacing it. I have everything unbolted except for the top bolt on the passenger C clamp. It’s a 3.7 engine. Can anyone describe how to get to the top bolt to get it undone. For the life of me I...
  3. reaper

    Steering Rack Fixed!!!!

    This job was a PAIN in the butt with the Rancho lift. See the bolt on the left hiding behind the crossmember? That one SUCKED. It took me 8 hours to remove it, swap the bushings, and throw it back on there. I used the Outfitter Design steering rack fix which comes with Delrin bushing...
  4. reaper

    TIP: When you replace the steering rack...

    When you replace the steering rack and you have high miles (I have 102,000), you should also replace the power steering pump HOSE that goes from the pump to the rack. The hose assembly is about $115. I replaced the rack but not the hose and wouldn't you know it but the first trail out that hose...
  5. alrock

    Hunner sleeve install with a twist

    Did the Hunner Sleeve install today on my steering rack but added another element to the mix. I put a layer of 1/16 neoprene rubber, 60 durometer, inside the sleeve to make sure the sleeve was really snug plus to add a bit of NVH absorption. The rubber had adhesive on one side to help secure it...
Top