Crappy ride

[954paulo]

How would I tell if my tbars are shot? My truck seems to nose dive and have a lot of body roll side to side lately


Sent from my iPhone using Tapatalk

 

[poweraidon]

Did your bump stops fall out?


Sent from my iPhone using Tapatalk

 

[digglesworth]

Is it having a hard time holding the ride height? Saggin?

 

[954paulo]

Bump stops are still there. Seems to have sagged a little. After 90k I guess it's time


Sent from my iPhone using Tapatalk

 

[digglesworth]

I'm talking at an accelerated rate. Like you set them to 23.5" and in 4 months it's sagged to around 23"....

 

[954paulo]

Not sure those measeents don't mean anything anymore


Sent from my iPhone using Tapatalk

 

[digglesworth]

Oh.... Are you lifted now?

 

[954paulo]

After the body lift and a couple of other mods I'm higher them 23.5


Sent from my iPhone using Tapatalk

 

[digglesworth]

24.5?

 

[954paulo]

I'm still awaiting the rancho lift. But the ride has gotten so choppy that I just bought the alpha torsion bars. Figure it's worth a shot


Sent from my iPhone using Tapatalk

 

[digglesworth]

Other mods???? I'm curious.

 

[digglesworth]

Let me know how that works out. I have the body lift on the way and about to mount my winch in my Thorparts bumper. I run the TD bumpstops on the street but switch back to oem for the trail. I figure with the stiffer alpha bars, I can just keep the oem ones in all the time. The stiffer bars will combat the nosedive and body roll vs the stiffer TD bumpstops...

 

[954paulo]

I put bigger rear shackles and added to the body lift. I have the Thor bumpers so the gaps aren't noticeable.


Sent from my iPhone using Tapatalk

 

[954paulo]

Yeah that's what I'm counting on. The nose dive and body roll is terrible at the moment. If I don't get a rancho soon I might just get out the plasma cutter and go to work


Sent from my iPhone using Tapatalk

 

[digglesworth]

Same here. Warrior extended shackles. Body lift. Thorparts front and rear bumpers.

 

[Bigunit]

I have no nose dive or body roll with the alpha torsion bars on my non-alpha H3T with the 3.7l.

 

[derian06]

I have no nose dive or body roll with the alpha torsion bars on my non-alpha H3T with the 3.7l.

Where did you buy your alpha bars?


Sent from my iPhone using Tapatalk

 

[Bigunit]

Off of another forum member who replaced them with an even stiffer set of non-OEM t bars.

 

[Pappibri]

How much does a set of Alpha torsion bars run?
Sent from my RM-820_nam_att_100 using Tapatalk

 

[954paulo]

225 shipped from gmparts. Part number 12 and 13 I think. I'll post back when I get them installed


Sent from my iPhone using Tapatalk