Paladine71
ΜΟΛΩΝ ΛΑΒΕ
- Messages
- 1,483
- Location
- Tallmansville, WV
Trail reports? I have the 2" SAMCO shackles, they should work with this, correct?
-
Welcome to H4O! For a reduced ad experience, please login or register with the forum.
H3 High Clearance Leaf Spring Mounts
- Thread starter Schwarttzy
- Start date
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
I've never had an issue with them and it's been months now with the redesign and abusing them. The samco shackles will work perfectly with the High Clearance Leaf Spring mount.
mantracker
Well-Known Member
- Messages
- 159
- Location
- Tennessee
Schwarttzy, Do you still have a set of the H3 high clearance leaf spring mounts, in bare metal? If so, I'd like to get a set.
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
Ya, I have bunch sitting in my garage right now. All the part I have basically sit in a box until they are paid for and then weld them together and powder coat if necessary.
mantracker
Well-Known Member
- Messages
- 159
- Location
- Tennessee
PM sent.
mantracker
Well-Known Member
- Messages
- 159
- Location
- Tennessee
I completed the purchase on your website. Looking forward to getting these installed.
Thanks Eric.
Thanks Eric.
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
Completely putting the money part of it aside, I just love seeing my parts getting bolted on. I'll never be in the league that companies like Genright, Clayton Off-Road, or AEV-Conversions have achieved, but it's cool to think that in some sense I'm among that group. Well, the pee-wees, but I don't care.
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
The shackles should definitely help out. Also my waiting on the laser cuter to cut some more for me, so it might be a little bit before I ship it. Tell me if you have any problems with that.
justin94tt
Well-Known Member
- Messages
- 169
- Location
- Springfield VA
Just wondering why I haven't seen any reviews on this product after the redesign. It seems like a great product. I think it would do a lot better if there were some positive trail reviews on the forum. (Sorry if there are, I have not found them)
Cajun_Tiger_Hummer
Well-Known Member
- Messages
- 428
- Location
- Lafayette, La
Do these work with the Rancho Lift?
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
I'm hoping to get someone to review it, I think it would be a big help too. If I gave you $10 bucks off the price, would you take some photos and review it for me?
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
Should work just fine.
justin94tt
Well-Known Member
- Messages
- 169
- Location
- Springfield VA
Pmed
rascole
Well-Known Member
- Messages
- 2,672
- Location
- Bellflower, CA
Payment sent.
Sent from my SPH-L710 using Tapatalk
Sent from my SPH-L710 using Tapatalk
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
Some custom parts I picked up today.
RamRod
Well-Known Member
- Messages
- 3,914
- Location
- AB, Canada
I likey!!!
I love that colour of green when paired with black!
Sent from handheld smoke signal device
I love that colour of green when paired with black!
Sent from handheld smoke signal device
digglesworth
Well-Known Member
- Messages
- 1,789
- Location
- illinois
So how do these interact with the 5100 rear shocks? I may do shackles at the same time but I may not too... I need to extend my brake line bracket to get some slack and pull some slack out of my abs wires before I increase articulation in the rear. I also wanna do a 1" body lift. But those dang low hanging shock mounts are really bothering me.
Veaters_h3
Active Member
- Messages
- 27
- Location
- Elko,nv
Any available by chance?!?
Schwarttzy
Sponsor
- Messages
- 1,362
- Location
- Rockford IL
I have the steel cut and bent sitting in my garage, all I need is the cash to weld and powder coat them. You can purchase them on my website at http://schwarttzy.com/shop/h3-hummer-high-clearance-leaf-spring-mounts/
I'm so small of an operation that I just have the cash to be sitting on these parts all the time.
rascole
Well-Known Member
- Messages
- 2,672
- Location
- Bellflower, CA
Honest review. Quality feedback.
ABNTROOP
HIPPO
- Messages
- 1,985
- Location
- Vancouver, Wa
So Schwarttzy and I chatted on the phone on my way in to work this morning. I will say this, he stands behind the strength of his products, he is very approachable, and his customer service is top notch.
He has offered to take in trade this 1st gen set in exchange for his current design to review. I believe his plan is to take this first gen set I currently have, install them, and beat the tar out of them to prove my concerns on weld strength unfounded.
FYI for anyone considering purchasing these, As per our conversation this morning he told me the welding on current units is done by the same company who is laser cutting them.
In my video I made two mistakes, I apologize, it had been a very long work day. First was a measurement I called out between the shock mounts as 1" when it was 1.5", and second, The U bolts were going the wrong direction. Once rotated to the proper holes they are snug but will fit. With the current design in these the tab system helps the pieces lock together and square up before welding eliminating my concerns over non straight and non square parts.
With the welding being sourced out to a professional shop, that lessens my concerns in that department as well.
I will kick out a video once the replacements come in.
He has offered to take in trade this 1st gen set in exchange for his current design to review. I believe his plan is to take this first gen set I currently have, install them, and beat the tar out of them to prove my concerns on weld strength unfounded.
FYI for anyone considering purchasing these, As per our conversation this morning he told me the welding on current units is done by the same company who is laser cutting them.
In my video I made two mistakes, I apologize, it had been a very long work day. First was a measurement I called out between the shock mounts as 1" when it was 1.5", and second, The U bolts were going the wrong direction. Once rotated to the proper holes they are snug but will fit. With the current design in these the tab system helps the pieces lock together and square up before welding eliminating my concerns over non straight and non square parts.
With the welding being sourced out to a professional shop, that lessens my concerns in that department as well.
I will kick out a video once the replacements come in.